Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
Configure encoding
Setting Description
If you don't know what value to use, a good place to start is 5000 kbps
(slightly less than a typical DVD). Test to see how this works for your
viewers and adjust.
Configure audio codec
If your channel sources included audio (see Create a simple channel or Create a custom channel), your stream
will by default use the AACaudio codec at 48 kHz. You can modify this setting to best match your streaming
or post-processing needs.
To configure your stream's audio codec :
1. Login to the Admin panel as admin. See Connect to the Admin panel.
2. Click Encoding for the your channel; the encoding configuration page opens.
3. Scroll to the Audio settings section.
4. Ensure the Enable audio checkbox is checked.
5. If the default audio format AAC 44KHz, stereo, 320 Kbps is not desired, click the Audio format drop-
down menu to select an audio codec. A table at the end of this procedure gives details about each
option.
6. Click the Audio channels drop-down menu to choose mono (1 channel) or stereo (2 channels).
141