Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide
Configure encoding
If the image is used as part of the layout for any channel, select a different image or no
image by using the drop-down list in the Picture settings box within that channel's layout
before deleting the file using the steps below.
3. Click Branding Content under the Configuration menu; the configuration page opens.
4. Click Remove; a confirmation dialog box opens.
5. Click OK; the dialog box closes and the image file is removed from the configuration page.
Configure encoding
You can modify the encoding settings for each channel you create. These settings let you perfect your stream
by selecting the right frame size, bit rate, audio/video codecs and more.
This section covers the following encoding topics:
l Configure video codec
l Configure frame size
l Fine tune stream settings
l Configure audio codec
l Codec and file format compatibility
Configure video codec
To configure encoding:
1. Login to the Admin panel as admin. See Connect to the Admin panel.
2. Click the Encoding link for your channel; the encoding configuration page opens.
135