Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide
Create a custom channel
For analog audio signals, you may want to check audio levels on your channel and adjust audio gain, if
needed. See Adjust audio volume .
Other things you may want to add to your layout:
l Add a video source (custom channel)
l Add an image (custom channel)
l Add a text overlay (custom channel)
l Delete or move a layout (custom channel)
l Set the background color (custom channel)
l Rename a layout (custom channel)
To upload an image
You can customize your channels by adding pictures as backgrounds, overlays or information. Collectively the
images you upload to the system are known as branding images.
For best results always upload images that are already the correct size needed in your layout.
Background images should match the frame size of your channel (frame size is set in the
Encoding configuration page).
There are two ways to upload branding images. You can upload images to the branding page, as described in
this procedure, or you can drag and drop images using the procedure described in Add an image (custom
channel). Note that using the procedure below is the only way to see whether or not you'll be overwriting an
existing image.
To upload a branding image to the branding page:
1. Login to the Admin panel as admin. See Connect to the Admin panel.
3. Click Branding Content under the Configuration menu; the configuration page opens.
114