User's Manual

SXT-800U User Quick Manual 9/15
Ⅴ. Time Menu
Alarm ‘##31’ + [HHMM]
- You can set the alarm time.
- After entering ##31, immediately short go-ahead tone will be heard.
- Enter 4-digits for an alarm time like as ‘HH-MM’ of 24 hour type.
- After entering an alarm time. press À to alarm on.
- To turn an alarm off, Press ‘#’ key after entering this command of ##31.
Ex)
##31 + 1540 + À : to set an alarm time to PM 3 oclock 40 minute. .
##31 + # : to cancel predefined alarm time. ( means turn an alarm off )
Auto send time ‘##32’ + [Index of Time Table]
- You can set auto send time which is setting as 5 secs defaultly..
- Auto send time will be able to be set as from 1 sec to 10 secs according to a index as below..
- After entering a time index, press À to set.
- Press ‘#’ to cancel what you did,
<Time table>
1 2 3 4 5 6 7 8 9 0
1sec 2sec 3sec 4sec 5sec 6sec 7sec 8sec 9sec 10sec
Ex)
##32 + 7 + À : to set an auto send time to 7 secs. .
##32 + 0 + À : to set an auto send time to 10 secs
Flash time ‘##33’
- To recognize a flash key of your POTS well, you can adjust this period time with an
experimental results.
- After entering ##33, a short go-ahead tone will be heard.
- At this time, you can enter your flash time between 50 ms and 800 ms.
- If you entered an excessive time lke more then 800 ms, What you did will be canceled with
an alert tone.
- To set an entered flash time, Press À. Or press ‘#’ to cancel what you did.
Ex)
##33 + 200 + À : to set a flash time to 200 ms