User's Manual

SIT SXT-2080 Fixed Wireless Terminal
CDMA FWT SXT-2080
Rev.01.2.SM.SC.11.09.05
8 User Guide
Voice privacy ‘##44’
- You can activate the option of Voice privacy to protect your voice from being tapped.
But It is possible only if the operator supports this feature..
- You can change the option by doing follows.
- Press ‘À’ for changing a current value to ‘Standard’ option
- Press ‘#’ for changing a current value to ‘Enhanced’ option.
NOTE: If you want to change Voice privacy’s option on conversation, you press
“À À 0À ” for standard mode or “À À 1À ” for enhanced mode.
Ex) Suppose a current lock code ‘7777’
##44 Î a lock-code prompt sound Î 7777 Î a confirmation tone Î Press ‘#’ : Enhanced
##44 Î a lock-code prompt sound Î 7777 Î a confirmation tone Î Press À : Standard
Auto Gain Control ‘##45’
- You can activate AGC which is able to adjust volume level according to the order from BTS.
- After entering a command of ##45,
- Press ‘À’ to make it enable
- Or press ‘#’ to make it disable
SUPPLEMENTARY FEATURES (NETWORK DEPENDENT)
Call Waiting
Call Waiting enables you to be alerted to an incoming call while you are already on a call. You have
the option of responding to the second call while putting the first call on hold. You can also disable
the call waiting option during a particular call. Contact your service provider to activate Call Waiting.
Three-Way Calling
Three-Way Calling enables you to activate up a three-way conversation with two other different-numbered
users. Contact your service provider to activate Three-Way Calling. To use Three-Way calling, use the
following steps:
1. Call 1st party
2. While in call with 1st party, dial the number of the 2nd party
3. Press hook switch (or flash button)
4. When connected to 2nd party, press hook switch (or flash button) again to connect all parties.
Call Forwarding
Call Forwarding enables you to forward all your incoming calls to another phone number, even if your
telephone is turned off. You can continue to make calls from your telephone when Call Forwarding is
activated. Contact your service provider to activate Call Forwarding.
Caller ID
Caller ID notifies you who is calling by displaying the caller's number on the telephone's display when an
incoming call comes through with a ring. This feature is available only with a telephone that has an LCD
display on it. Contact your service provider to activate Caller ID.
SXT-2080 TROUBLESHOOTING
Telephone Service is Not Working
If the telephone service is not working, first check the operation of the telephone equipment and wiring
connected to your SXT-2080. Test the equipment on a different service or piece of equipment
to ensure proper operation, or connect a known good telephone device to the phone port on the SXT-2080
unit. This will verify the condition of the telephone equipment and the internal wiring of the telephone service
to ensure that it’s working properly. If the telephone system or wiring is not working properly, replace or
repair the equipment as required. Otherwise, contact your cellular provider or your authorized Sungil
distributor.