User's Manual

SIT SXT-2080 Fixed Wireless Terminal
CDMA FWT SXT-2080
Rev.01.2.SM.SC.11.09.05
6 User Guide
. Tools MenuⅢ
Caller ID ‘##21’
- In the Caller ID menu, you can select CID type for your phone type.
- There are 3-types of caller ID. Please select one of the following and press ‘À’to activate.
- If you want to deactivate the caller ID feature, press ‘#’.
<Caller ID types>
1. BELLCORE
2. V.23
3. DTMF
4. None CID (same as ‘#’key)
Dial Tone ‘##22’
- In the Dial tone menu, you can select dial tone for your country.
- There are 4-types of dial tone type, as specified below.
- Press ‘À’ to activate. Press ‘#’ to cancel.
<Dial tone types>
1. Default
2. Latin America
3. East Europe
4. China / Siria
5. Australia
6. India
Ex)
##22 + 1 + À : to activate a dial tone as a default dial tone.
##22 + 6 + À : to activate a dial tone as an india dial tone.
. Time MenuⅣ
Alarm ‘##31’
- In the alarm menu, you can activate the alarm time.
- Enter 4-digits for alarm time as ‘HH-MM’ type.
- If you want to activate alarm time, press ‘À’.
- When you press ‘#’, alarm deactivate.
Auto send time ‘##32’
- In the Auto send time menu, you can select and control auto send time.
Auto Send Time controls the length of time that FWT waits before any dialed call is made to the Network.
- There are Ten Selections (1sec~10sec). Press ‘À’ to activate.
- If you press ‘#’, set time will be deactivated, and activate the Default time (1sec)
<Time table>
1 2 3 4 5 6 7 8 9 0
1sec 2sec 3sec 4sec 5sec 6sec 7sec 8sec 9sec 10sec