User Manual

8
CDMA 1x WLLPhoneCDMA 1x WLLPhone
RSSI Signal Strength Indicator .
Indicates that phone is exploring Main Menu or Message Menu
Indicates the Alarm status
Indicates that user has a message in the mailbox
User is using the phone book menu.
Battery Signal Indicator
• Display
• Power On/Off
To Power on
When you are ready to turn your phone on, fully extend
the antenna for best reception.
The antenna must be used with main phone unit for
best reception. Simply connecting the power adaptor
to the back of main phone unit should turn the
phone on and three things will happen:
1. The Power LED indicator is turned on
2. The phone beeps and
3. The start-up graphics begin to play
The phone will then begin searching for a network signal. When a signal is found,
the RSSI icon appears and your phone enters Standby mode. Now the phone is
ready for making calls and receiving calls. (If you want to operate with battery,
please turn the battery switch on the back of main phone unit. Battery must be
placed in first for battery operation)
To Power off
To turn your phone off, simply plug off your power adaptor from
the back of main unit. If you are using your battery for
operations, then please use the battery power switch
on the back of units.
Navigation Keys – Arrow keys
2. Basics