User Manual

CDMA 1x WLLPhone
24
For all text message operation, simply press MSG button. Then you will be in MSG menu.
Check your message!
Once you are in MSG menu,
select(1) to choose current Msg.
Then message will be displayed with current
Message status about Text and voice messages.
Write and send a text message
1. Press MSG [ ]
2. Press Text Message [ ] and Write [ ] to
write text message.
3. Press Store [ ] after entering dial number.
4. Write message using the alphanumeric keypad
5. Press Store [ ] to display a call back number
6. Press Store [ ]. Select message type using
UP&DOWN
7. Press Store [ ] to determine allow this
message to be store in memory for using it later.
8. Press Store [ ] to send the message.
7. Communicate with text messages
and voice mails
1 : CURRENT
MSG
2 : TEXT
1 : WRITE
MSG
2 : INBOX
[DIAL
NUMBER]
Hi _
CALLBACK
NUMBER
SMS
PRIORITY IS
[ MESSAGE
SEND ]
• Setting warning ring tones
You can use warning tones to get alerts from your phone for:
Minute Alert
Minute Talk time alert is used when you’d like to be alerted each minute you are on the
phone. The phone will automatically alert with a beep each air time minute.
1. Press MENU [ ] button, and
press [ ] for Ring/Sound
2. Select Service Alert - [ ] to
access 1 Min Alert Mode
Service Area Alert
Service alert can be activated to distinguish the Service Area for your mobile. If the mobile
is near. “No Service Area”, Antenna display should have no bars to indicate low signal
strength. With this alert on, the mobile will alert the user with warning tone and calls will be
dropped.
1. Press MENU [ ] button, and
press [ ] for Ring/Alert Sound
2. Select Service Alert - [ ] to
access Alert Mode.
23
CDMA 1x WLLPhone
1MINUTE
ALERT off
SERVICE
ALERT off
• Setting the time format
1. Press Menu [ ] [ ] enter the Lock Number
[ ] [ ] (Menu – Settings –Display –
Time)
2. Use your navigational keys [ ] to choose your
time format
AM/PM
24 Hour
No Display
DATETIME
AM/PM
Type