User Manual

ManualsBrandsEpiCom ManualsElectronicsCDMA WLL Desktop Phone

CDMA 1x WLLPhone

• Change your security code

You can personalize your phone to protect your calls and data by setting your own security

code. Factory Default is preset at ‘0000’. Please change the lock code to any 4 digit

numbers you’d like.

1. Press MENU [ ] button and select

Settings [ ] .

2. Enter your old security code.

(Default preset code is ‘0000’)

3. Select “New Code” [ ]

4. Enter your new security code, and press

store [ ]

5. For verification, enter the same code again

and press store [ ] .

• Restrict calls

This feature allows you to restrict incoming, outgoing, long distance, and international calls,

based on a list of phone numbers that you create.

When calls are restricted, calls may be possible to the emergency number programmed into

your phone. (for example, 911 or other official emergency numbers). However, Emergency

key may not work depending on the type of restriction you choose.

1. Press Menu [ ], and select Settings [ ].

2. Enter your security code.

3. Select Restrict [ ].

Enter Lock

Code

1 : New Code

2 : Areas

Code

1 : New Code

2 : Areas

Code

ENTER NEW

CODE

----

RE-ENTER

CODE

----

• Calculator

Calculator supports float point calculation up to 3 digit under point. You can use Star Key

[ ] to change a operator and use Pound Key [ ] to change a cursor position.

1. Press MENU button and select Tools [ ]

2. Select Calculator [ ] to run it.

For example of (123.456+9)

1. Press 1,2,3

2. Press Star Key [ ] until you meet ‘ ’ and press

Pound Key [ ] and press 4,5 and 6.(You just

made 123.456).

3. Press Pound Key [ ] to move cursor to right.

And press Star Key [ ] until you meet ‘ ’.

4. Press Pound Key [ ] and Press [ ] .

( So far, you made 123.456+9)

5. Press Store [ ] Key to get a result for 123.456+9.

1 : Alarm

2 : Calculator

3 : Cost Setup

Input Num :

123.456

Input Num :

123.456

Input Num :

123.456