User's Manual

CDMA 1x WLLPhone
Right – Store Key
Left – Clear Key
• Display
New Message
Alarm
Service
Roaming
Battery Strength
Signal Legnth
• Power On/Off
To Power on
When you are ready to turn your phone on, fully extend
the antenna for best reception.
The antenna must be used with main phone unit for
best reception. Simply connecting the power adaptor
to the back of main phone unit should turn the phone
on and three things will happen:
1. The Power LED indicator is turned on
2. The phone beeps and
3. The start-up graphics begin to play
The phone will then begin searching for a network signal. When a signal is found,
the RSSI icon appears and your phone enters Standby mode. Now the phone is
ready for making calls and receiving calls. (If you want to operate with battery,
please turn the battery switch on the back of main phone unit. Battery must be
placed in first for battery operation)
To Power off
To turn your phone off, simply plug off your power adaptor from the back of main
unit. If you are using your battery for operations, then please use the battery power
switch on the back of units.
• Keys
Navigation Keys – Arrow keys
8 9
2. Basics
CDMA 1x WLLPhone
Dial (SEND) Button
Menu Button
Message Button
On-hook(Speaker) button
Up/Down – Directional Keys