User's Manual

• Erase messages
1. After following key sequence of Reading a text message.
2. If you found a message to be deleted, Press Store key to access Erase Menu.
3. Press Store key to delete or Clear key to exit this menu.
4. If you want to erase all messages, Press MSG and “Msg Erase”(5).
5. Press STO to erase all.
• Set variable message option
1. If you get a security for MSG menu, Press MSG, “Msg Option”(4) and select “Msg
Lock”(1). This will request a password for accessing MSG menu.
2. If you don’t like to be alerted for receiving messages, select “Msg Alert”(2) to set
alert on or off..
3. If you need to set voice mail center access number, select “VM Center”(3).
4. At the end of progress for setting option, press store for your option.
For all text message operation, simply press MSG button. Then you will be in MSG menu.
• Write and send a text message
Once you are in MSG menu, select ‘3’ to choose ‘send’ a text message. Then press
‘1’ to write a message.
• Send and forward a text message
1. Press MSG,
2. Press “Text Message”(2) and “Write”(1) to write text message.
3. Press Store after entering dial number.
4. Write message using the alphanumeric keypad
5. Press Store to display a call back number
6. Press Store. Select message type using UP&DOWN
7. Press Store to determine allow this message to be store in memory for using it
later.
8. Press Store to send the message.
• Receiving and Reading a text message
1. If a text message is received, The content of text message and icon will display.
2. Press MSG , And select “Text Message”(2) and “Inbox”(3) to see each received
msg.
3. Press SEND to call back if the caller leaves a phone numbers.
• Listening a voice message
1. If a voice message is received, The information of voice message and icon will
display.
2. Press MSG , And select “Voice Mail”(3)
3. Press SEND to access voice message center and follow instructions from voice
message center.
20 21
7. Communicate with text messages and
voice mails
CDMA 1x WLLPhone CDMA 1x WLLPhone