User's Manual

Turning the alarm clock off
1. Press Menu 4-1 (Tools – Alarm)
2. Select “OFF” to turn your alarm clock off
• Setting the time format
1. Press Menu-5-6-3 (Menu – Settings –Display – Time)
2. Use your navigational keys (up/down) to choose your time format
AM/PM
24 Hour
No Display
• Setting warning ring tones
You can use warning tones to get alerts from your phone for:
1 Minute Alert
1 Minute Talk time alert is used when you’d like to be alerted each minute you are on
the phone. The phone will automatically alert with a beep each air time minute.
1. Press MENU button, and press ‘3’ for Ring/Sound
2. Select Service Alert - ‘5’ to access 1 Min Alert Mode
Service Area Alert
Service alert can be activated to distinguish the Service Area for your mobile. If the
mobile is near. “No Service Area”, Antenna display should have no bars to indicate
low signal strength. With this alert on, the mobile will alert the user with warning tone
and calls will be dropped.
1. Press MENU button, and press ‘3’ for Ring/AlertSound
2. Select Service Alert - ‘6’ to access Alert Mode
You can change certain settings so that your phone suits your own needs and lifestyle.
Changes you can make include changing the language on the screen, showing or hiding the
clock and volume controls.
• Adjust volumes
You can change the volume level on your phone, making incoming voices sounds
louder or softer. The volume control can be adjusted by accessing the MENU by
pressing MENU button and selecting ‘Ring/Sound’(3), and then select “Vol
Control”(3). In this submenu, you can control one of various volumes after selecting
one item and using your navigation Up/down keys. If you meet acceptable volume,
Press ‘Store’ to confirm.
• Personalize Ring Tones
You can personalize your ring tones following these steps.
1. Press MENU
2. Select Ring/Sound by pressing ‘3’
3. Select Ring Tone by pressing ‘2’.
4. Use your navigation UP/DOWN keys to choose your ring tone.
• Setting the alarm
The alarm clock uses your phone’s clock and can be set in advance to sound an
alert at a designated time. As long as phone is turned on, your phone will
automatically wake up and sound the alarm at the specified time. The volume for the
alarm clock is determined by the current ringing volume.
Setting the alarm clock
1. Press Menu 4-1 (Tools – Alarm)
2. Select “SET” to turn your alarm clock on.
3. Input your desired alarm time using keypad. (Input display will be 24-hour)
4. Once the input is finished, press ‘Store’ to set your alarm on.
18 19
6. Personalize phone settings
CDMA 1x WLLPhone CDMA 1x WLLPhone