User's Manual

CDMA FWP SXP-2080

Technical & User Manual

Battery Strength Indicator

This product’s battery level indicator is located at right side on LCD. Battery Level expresses battery levels with

3 bars. In case of low battery, Just battery icon displays and there is no level in battery indicator.

When a battery level is low level, “Low Battery Warning!” displays and warning tone sounds and a phone will

get into shutdown mode.

Over Voltage Protection

This product’s rated voltage is 5V but if you use over 5V, “Over Voltage! Check Power” message displays and

warning beep tone sounds continuously until you take off this unrated voltage power.

Basic Phone Function

Placing a Call

1) Pick up the handset and listen for a dial tone. 2) Dial the phone number.

Receiving a Call

When your telephone rings, pick up the handset and begin talking.

NOTE: If you hear an incoming call while picking up the handset, you can receive the call by hanging up (placing the

handset on the cradle) immediately. This will cause the phone to start ringing.

Ending a Call

Hang up the phone (place the handset onto the cradle).and Press the speaker key.

Make a Call

You can see “Call” soft key while you are dialing the phone number. You can immediately make call when you press button

located at blue circle as below picture.

RSSI Indicator

Battery Indicator