User's Manual

CDMA FWP SXP-2080 4 Technical & User Manual
And it presses as the lower picture the ⑥key from standby condition and we can adjust the speaker,key beep
or earpiece volume on which it depend the condition of hook on/off.
Power On/Off Operation
③ Power key is using to turn it on/off when a battery is used as power source. If AC power supplies to the
product, a power key is not required but in case of battery mode, you should turn it on and off with this
power key.
1) AC power thru the adapter.
If you press ③ Power key for around 2 seconds under AC power mode, The phone inform you of a
message,“Can’t turn off on AC state”.
2) Battery power without the adapter
If you press ③ Power key for around 2 seconds in a while a phone is working, The message of “Press Ok Key
for Tuning Off!” will display and then If you press OK soft key , the phone will turn it off. Otherwise, you can turn
it on by same method with turned-off phone.
Signal Strength Indicator
RSSI (Receive Signal Strength Indicator) –
This product’s RSSI indicator is located at left side on LCD. RSSI Level expresses current signal strength in 3
bars. If you are in no service area, Just base station icon displays and there is no level in RSSI indicator.
Press the up navigation key in standby
condition, you can show to the dialed
numbers
Press the down navigation key in standby
state, you can control to the volume depend
on hook on/off.