User's Manual

CDMA FWP SXP-2080 12 Technical & User Manual
3. Profile 3.Hotline – 1.SetUp
This feature is used when there is an emergency situation that has to be made within specific time frame. Hotline,
when it is turned on, will automatically call the designated Hotline Number within previously selected Hotline Time.
When the phone is on Off-Hook for selected Hotline Time, then the phone will call Hotline
This feature automatically dials a specific number at hotline time.
1. Press the ‘Menu’ and select profile, hotline and SetUp.
2. Select the option On or Off with your navigation Up/Down keys, and press…
3. if you choose the option to ‘On’, and input a dial number for emergency.
4. if you choose the option to ‘Off’, the feature disabled at standby state.
5. Factory default is ‘Off’
3. Profile 3.Hotline – 2.TimeSet
This feature sets the time of Hotline waiting time from Off-Hook to Hotline Dialing. Range is from 0~15 seconds of
waiting time. For example, if the phone is set at “0” seconds waiting time, the phone will automatically call the Hotline
Number.
3. Profile 4.Auto Time Out
After an user entered numeric digits for dialing, the phone will automatically call the number that was entered for
certain period of time. For example, if a user enters a phone number and waits for 4 seconds, without pressing ‘Call’
softkey then the phone will automatically time out, and call the entered number. Choose from 1 – 10 seconds for Auto
Timeout.
Factory Default is at 4 seconds
3. Profile 5.Call Time Display
This feature show to the call time on conversation, if it disabled the option to ‘Off’, it did not show to the call time on
conversation state.
1. Press the ‘Menu’ and select profile and CallTimeDisp
2. Select the option On or Off with your navigation Up/Down keys, and press…
3. Factory default is ‘On’
3. Profile 6.Setting – 1.Version
This feature show to the version of S/W, H/W and PRL ID,
1. Press the ‘Menu’ and select profile, Setting and vesion
2. First you can show to the S/W Version
3. Press the ‘More’ softkey and you can show to the H/W revision and PRL ID
Ex) S/W: PBINDT1NR0013N
H/W: 0.3 Î Board Revision
PRL: - no info Æ it’s mean not exist the PRL, if it exist the PRL data, you can show to the PRL id.
4. Sound Menu
You can use the Sound menu to customize various sound settings, such as ringer volume, type, and tone, DTMF length.
4. Sound 1.Ring Tone
This menu allows you to set the unique ring tone for any incoming calls that are not set from Phone Book. This Ring
Tone is the primary default Ring Tone of the phone.
1. Press the ‘Menu’ and sound and Ring Tone
2. Select the polyphony bell in the list of follows.
Poli Bell 1 - 10
Can Can,Willianmtel,Carnen
Trumpet,Turkey, Waltz of Sprin
Trout, Minuet, Heart of Woman,
Prelude, Waltz of Puppy, Mozart Minuet,
Elysee, Triump, Canon,
3. Factory default is Poli Bell 1