User's Manual

Charging and Discharging
Your phone is powered by a rechargeable battery, and also a power adaptor. Note that full performance of a new
battery is achieved only after two or three complete charge and discharge cycles! The battery can be charged
and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and
standby time) is noticeably shorter than normal, it is time to buy a new battery. Use only batteries approved by
the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer.
Temperature extremes can affect the ability of your battery to charge. Battery will not charge at temperatures
above 140°F (60°C).
Check the model number of any charger before use with this device. This device is intended for use when
supplied with power from the devices listed on the following pages. Warning! Use only batteries, chargers, and
accessories approved by SIT for use with this particular phone model. The use of any other types may invalidate
any approval or warranty applying to the phone and may be dangerous. For availability of approved accessories,
please check with your dealer. When you disconnect the power cord of any accessory, grasp and pull the plug,
not the cord.
8-3.Accessories
Standard Charger
This is a lightweight and durable ac charger. To use the standard charger, plug it into a standard ac wall outlet
and connect the lead from the charger to the base of your phone.
Item Description
Input Voltage : AC 100~350
Input Frequency : 50/60Hz
Output Voltage, Current : 5V(DC).1.5A
Note: If the battery is completely empty, you cannot use the phone until it has enough charge to operate in
battery mode. Please remember that product’s main source of operation power is from ac wall outlet power
source.
Data Cable(RS232C)
•Easy and convenient connection to your PC or laptop computer for wireless modem functionality.