User Manual

5
_ It is normal for batteries to gradually wear down and require longer
charging times. If you notice a change in your battery life, it is probably
time to purchase a new battery.
2.3 Extending Battery Life
When you are not using the device, push the power button lightly.
Then the WiFi LED indicator turns off and SER-8189 turns to Standby mode.
If you want to connect WiFi network again, push the power button lightly
again. A blue WiFi LED of indicates that SER-8189 is ready to connect.
2.4 Using a LAN cable (RJ45)
If you want to connect to RJ45 LAN cable to the SER-8189, plug the cable
to the RJ45 slot located between Micro USB port and power button.
Part 3. Using the SER-8189
3.1 Connecting the SER-8189
When you press the power button:
_ The SER-8189 comes on and the power LED lights up.
_ A solid green power LED of indicates that the device is charged over 40%.
1. Turn on the SER-8189 ensure your WiFi is enabled on your PC or laptop.
You can view your available wireless networks by going through the control
panel, network connections or system tray (lower right hand corner of your
screen).