User Manual

ManualsBrandsEpiCom ManualsElectronicsCDMA 1x EV-DO USB Modem with WLAN

EPIVALLEY SER-8189 QSG

Thank you for purchasing EpiValley SER-8189.

Note.

- This manual briefly the preparation, the process for installing and safety

precautions for using SER-8189 router.

- You are recommended to read the manual before using the SER-8189.

Table of Contents

CareandMaintenance‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2

Part1.GettingtoknowtheSER‐8189

 1.1PackageContents‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3

 1.2ConsistsofSER‐8189.‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3

Part2.SettinguptheSER‐8189

 2.1Chargingthebattery‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3

2.2BatteryTips‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4

2.3ExtendingBatteryLife‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4

2.4UsingaLANcable‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5

Part3.UsingtheSER‐8189

3.1ConnectingtheSER‐8189‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐5.

 3.2OpeningtheBrowserInterface‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐6

 3.3DeviceActivation(Winodws)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐6

 3.4DeviceActivation(Mac)‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐7

Part4.TechnicalSpecifications,RegulatoryandSafety

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐8

 4.1LEDOverview‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐8

4.2TechnicalSpecification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐9

4.3SafeInformation‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐9



4.4.Trademarks‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10

Summary of content (10 pages)

PAGE 1
EPIVALLEY SER-8189 QSG Table of Contents Care and Maintenance‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 2 Part 1. Getting to know the SER‐8189 1.1 Package Contents ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 1.2 Consists of SER‐8189. ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 Part 2. Setting up the SER‐8189 2.1 Charging the battery‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 3 2.2 Battery Tips ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 4 2.
PAGE 2
4.5 Copyright‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐ 10 1.1 Package Contents Care and Maintenance - EpiValley SER-8189 Mobile Hotspot Router It is normal that your wireless device gets hot when you use it. - QSG (Quick Start Guide) - Use your wireless device and accessories with care and in clean - AC-DC Travel Adaptor environment. - Carrying Pouch - Keep the wireless device from a fire or a lit cigarette.
PAGE 3
Slide open the battery compartment door by firmly pressing in the direction of the arrows. 2. Insert the battery by lining up the gold contact points on the battery with the gold contact points in the battery compartment. Then press down gently until the battery is seated. Part 2. Setting up the SER-8189 2.1 Charging the battery 1. The battery compartment is located on the bottom of the device. 3.
PAGE 4
locks into place. 4. Connect the micro USB end of the AC-DC adapter to the micro USB port Warning of the device. Use only EpiValley approved or EpiValley Wireless approved batteries and chargers with your device. The failure to use a EpiValley approved or EpiValley Wireless-approved battery and charger may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.
PAGE 5
_ It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery. 2.3 Extending Battery Life When you are not using the device, push the power button lightly. Then the WiFi LED indicator turns off and SER-8189 turns to Standby mode. If you want to connect WiFi network again, push the power button lightly again. A blue WiFi LED of indicates that SER-8189 is ready to connect. 2.
PAGE 6
2. Select “EPIVALLEY_SER-8189 XXXX” as your wireless network. Note. The last 4 digits, ‘XXXX’ of the SSID is the endemic numbers or combination of numbers and letters. You can find this unique SSID of your SER‐8189 on the label attached in the back side of the SER‐8189. 3. Click Connect 4. Open your computer web browser and enter http://10.10.10.254 into the address window and press the Enter key. 3.2 Opening the Browser Interface 1. Open your Web browser and enter http://10.10.10.
PAGE 7
If your device has not been activated at time of purchase, you must activate now. (그림1) Before you activate, you need SPC, MDN and MIN from the Carrier providing ¾ 2nd step is to input MDN and MIN. the service. Click Login button. Then, you will see the pop up screen requiring Manual Activation. Activation process consists of 2 steps. ¾ 1st step is to input SPC.
PAGE 8
it, Airport on Airport off And make it turn on to search the Wi-Fi networks around your place. Put the cursor on Airport Icon and turn the Airport on as below. EpiValley_SER8189 (그림4) Part 4. Technical Specifications, Regulatory and Safety Information 2. Choose “Open Network Preferences” on the drop-down menu and select “EPIVALLEY_SER8189” of your Wi-Fi network and apply it. 4.1 LED Overview Your device has Power/Wi-Fi/LAN/CDMA LEDs which provide status information about the device and network.
PAGE 9
No Light Power - Power on 1 No power Blinking Battery level under 5% Solid Battery level under 20% Orange Solid Battery level under 40% Green Solid Battery level over 40% Orange Solid In charging Operating temperature Fully charged Humidity No battery but connected to Storage Temperature Red Power - Power off Green Solid AC-DC adapter 2 Wi-Fi 3 LAN No Light Blue CDMA Radio Off Solid No Light Blue Red 4.
PAGE 10
WARNING: This equipment may generate or use radio frequency Regulatory Information (FCC Statement) energy. Changes or modifications to this equipment may cause harmful FCC Equipment Authorization ID: R2NSER-8189 interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this This device complies with Part 15 of the FCC Rules. Operation is subject to equipment if an unauthorized change or modification is made.