User's Manual

SAM User Manual
- 24 -
5. Tray Icon
5.1 The tray icon indicates if the modem is plugged in. Right-click the tray icon and select “Restore”
to enlarge the SAM window. Select “Connect” to access Internet, or ‘Exit” to exit the SAM
program. To power off the modem, click “Power Off”. When the modem is powered off, click
“Power On” to power on the modem.
6. Mass Storage
6.1 To use the Mass Storage function of the modem, Move the sliding switch(at the front of the
modem) to the left side. The modem LED is in red as the modem is being booted. After booting
the LED will be changed Red, Orange or Green as the signal strength.
6.2 If you wish to use the Mass Storage function while using another function of the modem with
SAM, disconnect Internet and Move the sliding switch(at the front of the modem) to the right side.
6.3 Be caution please. This feature does not give you the warning message.