User's Manual

11
Using SDC1000
Running Program
Run Epivalley HSDPA Dialer program be
below-described method.
1. 1. Doubleclick the shortcut icon (Epivalley
HSDPA Dialer) on the window.
Or on the task bar, click [Start] - [Program]
- [Epivalley] - [SDC1000_Dialer] - [Epivalley
HSDPA Dialer] in order.
2. Epivalley HSDPA Dialer program is run.
Connecting with PC
The USB Port of SDC1000 is built in the
main body. Pull out the USB Port and con-
nect it with PC.
Check whether LED part is lighted on.
* Note:
When SDC1000 is not used, re-
move it from PC and push USB Port inside
to be stored.
* Note:
When SDC1000 is used connecting
with a notebook, the receive sensitivity
may be reduced due to the electronic
wave generated by LCD monitor. In this
case, use it using the USB extensible
cable supplied when purchasing the
product.
1
2
3
4