Datasheet

ManualsBrandsEPCOS ManualsFiltersMains filter 20 A 440 VAC

EMC filters

4-line filters

for installations and systems

Rated current 10 and 20 A

Series/Type: B84108

Date: January 2006

 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the

information contained therein without EPCOS’ prior express consent is prohibited.

Summary of content (6 pages)

PAGE 1
EMC filters 4-line filters for installations and systems Rated current 10 and 20 A Series/Type: B84108 Date: January 2006  EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
PAGE 2
4-line filters B84108 for installations and systems Power line filters for 3-phase systems Rated voltage 440/250 V AC, 50/60 Hz Rated current 10 and 20 A Construction ■ 4-line filter ■ Metal case Features ■ ■ ■ ■ Medium insertion loss Small size (similar to SIFI) Easy to install ENEC10 approval Applications ■ Industrial electronics ■ Medical equipment ■ Elevators Terminals ■ Tab connectors 6.3 × 0.
PAGE 3
4-line filters B84108 for installations and systems Technical data and measuring conditions Rated voltage VR 440/250 V AC, 50/60 Hz Rated current IR Referred to 40 °C ambient temperature Test voltage Vtest 1414 V DC, 2 s (line/line) 2700 V DC, 2 s (lines/case) Leakage current lleak At 400 V AC, 50 Hz Climatic category (IEC 60068-1) 25/085/21 (–25 °C/+85 °C/21 days damp heat test) Approvals EN 133200 Characteristics and ordering codes VR AC V IR Ileak A 440/250 10 20 Ordering code Approv
PAGE 4
-line filters B84108 for installations and systems Insertion loss (typical values at Z = 50 Ω) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 10 A Filters for 20 A SSB1135-J 80 dB B84108S1004A110 80 dB B84108S1004A120 SSB1064-R α α 60 60 40 40 20 20 0 10 4 10 5 10 6 10 7 0 10 4 Hz 10 8 f Please read Cautions and warnings and Important notes at the end of this document.
PAGE 5
EMC filters Cautions and warnings Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences.
PAGE 6
EMC filters Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.