Datasheet

ManualsBrandsEPCOS ManualsInductorsInductor, SMD, 100uH, 65mA, 7MHz, 11.5Ohm

99 04/00

Size 1210 (EIA) or 3225 (IEC)

Rated inductance 0,0082 to 100 µH

Rated current 65 to 800 mA

Construction

■ Ceramic or ferrite core

■ Laser-welded winding

■ Flame-retardant encapsulation

Features

■ Very wide temperature range (up to 145 ˚C)

■ High

factor

■ High resonance frequency

■ Suitable for reflow (IR and vapor phase)

and wave soldering

Applications

■ Filtering of supply voltages, coupling, decoupling

■ Antenna systems

■ Automotive electronics

■ Telecommunications

Terminals

■ Electro-plated

■ 0,4 µm Cu, 1–2 µm Ag, 5–7 µm Sn

■ Base material CuSn6

■ Suitable for soldering and conductive adhesion

■ No leaching during wave soldering

Marking

Marking on component:

Manufacturer,

value (in nH) and tolerance of

value (coded),

date of manufacture (coded)

Minimum data on reel:

Manufacturer, part number, ordering code,

value and tolerance of

value,

quantity, date of packing

Delivery mode

8-mm blister tape, wound on 180-mm or 330-mm ∅ reel

For details on taping, packing and packing units see page 153

B82422-A****-+100SMT Inductors, SIMID Series

SIMID 1210-100

Summary of content (6 pages)

PAGE 1
SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Size 1210 (EIA) or 3225 (IEC) Rated inductance 0,0082 to 100 µH Rated current 65 to 800 mA Construction ■ Ceramic or ferrite core ■ Laser-welded winding ■ Flame-retardant encapsulation Features ■ ■ ■ ■ Very wide temperature range (up to 145 ˚C) High Q factor High resonance frequency Suitable for reflow (IR and vapor phase) and wave soldering Applications ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling Antenna systems Automotive el
PAGE 2
SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 General technical data Rated inductance LR Measured with impedance analyzer HP 4194A at frequency fL Q factor Qmin Measured with impedance analyzer HP 4194A/HP 4291A at frequency fQ Rated current IR Maximum permissible dc with inductance decrease ∆L /L0 ≤ 10 % and temperature increase of ≤ 20 K at rated temperature of 125°C Self-resonance frequency fres, min Measured with network analyzer HP 8753 DC resistance Rmax Measured at 20°C ambi
PAGE 3
SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Dimensional drawing 2±0,1 1) 0,5±0,2 1) 0,15 max. 2±0,1 1) 0,4 min.
PAGE 4
SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Characteristics and ordering codes Qmin fQ MHz IR mA Rmax Ω fres, min MHz Ordering code 2) (∅ 180-mm reel) 10 10 10 20 20 25 100 100 100 800 750 700 0,08 0,09 0,10 4000 4000 3500 B82422-A3829-+100 B82422-A3100-+100 B82422-A3120-+100 10 10 10 27 30 30 100 100 100 640 640 600 0,12 0,12 0,14 3000 2500 2500 B82422-A3150-+100 B82422-A3180-+100 B82422-A3220-+100 0,027 0,033 0,039 10 10 10 23 20 25 50 50 50 600 540 530 0,14 0,
PAGE 5
SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Characteristics and ordering codes (continued) fres, min MHz Ordering code 2) (∅ 180-mm reel) 0,34 0,37 0,50 320 300 270 B82422-A1102-+100 B82422-A1122-+100 B82422-A1152-+100 290 270 240 0,60 0,75 0,88 250 125 110 B82422-A1182-+100 B82422-A1222-+100 B82422-A1272-+100 7,96 7,96 7,96 200 190 150 1,20 1,40 2,20 110 110 110 B82422-A1332-+100 B82422-A1392-+100 B82422-A1472-+100 27 27 27 7,96 7,96 7,96 140 135 130 2,60 2,80 3,00 100
PAGE 6
SMT Inductors, SIMID Series B82422-A****-+100 SIMID 1210-100 Impedance |Z | versus frequency f measured with impedance analyzer HP 4291A Inductance L versus dc load current IDC measured with LCR meter HP 4275A SSB1539-7 10 5 Ω |Z | 10 4 10 3 10 2 10 1 100 µ H 10 µ H 1 µH 100 nH 10 nH 10 0 10 _1 10 3 10 4 10 5 kHz 10 6 f Q factor versus frequency f measured with impedance analyzer HP 4194A / HP 4291A Current derating Iop/IR versus ambient temperature TA SSB1450-B 1,2 IΙopB IΙRR 1,0 0,8