Datasheet

Data SheetData Sheet

Date: September 2006

 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the

information contained therein without EPCOS’ prior express consent is prohibited.

Ferrites and accessories

PS 7.35 × 3.6

Core and accessories

Series/Type: B65933, B65512

PAGE 1
Ferrites and accessories PS 7.35 × 3.6 Core and accessories Series/Type: Date: B65933, B65512 September 2006 Data Sheet  EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS’ prior express consent is prohibited.
PAGE 2
PS 7.35 × 3.6 Core and accessories B65933, B65512 PS 7.35 × 3.6 through P core half 150 × 30 1,5+0,2 To IEC 62323 Recommended for new designs For inductive proximity switches Material N22 for the frequency range from about 80 to 800 kHz ■ Material M33 for higher frequencies up to about 1.6 MHz 1,5 2,8+0,2 5,8+0,15 7,35 _ 0,3 Material Approx. weight g Ordering code N22 0.3 B65933A0000X022 M33 0.
PAGE 3
Ferrites and accessories Cautions and warnings Mechanical stress and mounting Ferrite cores have to meet mechanical requirements during assembling and for a growing number of applications. Since ferrites are ceramic materials one has to be aware of the special behavior under mechanical load. As valid for any ceramic material, ferrite cores are brittle and sensitive to any shock, fast changing or tensile load.
PAGE 4
Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned.