Datasheet

Dimensions and weights for heat sink mounting:
Ter-
minal
Dimensions (mm) with insulating sleeve Min. reach
of screw
mm
Approx.
weight
g
d l
±1
l
1
±0.35
l
2
+0/1
d
1
d
2
max.
a
+0.2/0.4
M5
M5
64.3 +0/0.8
64.3 +0/0.8
80.7
105.7
86.3
111.3
17
17
M12
M12
13.2
13.2
28.5
28.5
7.3
7.3
370
440
M6
M6
76.9 +0/0.7
76.9 +0/0.7
105.7
143.2
110.6
148.1
17
17
M12
M12
17.7
17.7
31.7
31.7
9.7
9.7
620
840
M6
M6
91.0 +0/2
91.0 +0/2
97.0
144.5
101.4
148.9
17
17
M12
M12
17.7
17.7
31.7
31.7
9.7
9.7
1000
1200
Dimensions for other sizes are available upon request.
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
Thread Toothed
washers
Screws/nuts Maximum
torque
For terminals M5 A 5.1 DIN 6797 Cylinder-head screw M5 × 8 DIN 84-4.8 2 Nm
M6 A 6.4 DIN 6797 Cylinder-head screw M6 × 12 DIN 85-4.8 2.5 Nm
For mounting M12 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm
The following items must be ordered separately. For details, refer to chapter "Capacitors with
screw terminals  Accessories".
Item Type
Ring clips B44030
Clamps for capacitors with d ≥ 64.3 mm B44030
Insulating parts B44020
B43456, B43458
Extremely compact  85 °C
Page 7 of 18Please read Cautions and warnings and
Important notes at the end of this document.