Cut Sheet
Page 5
www.engproducts.com
Specications subject to change without prior notice.
FIXTURE WHIPS
UNITS OF MEASURE KEY
Order Unit: The Unit to be ordered; Order Qty: Number of pieces in each Unit; Unit Pkg: Packaging types - BRL (Barrel); Units/Case: Unit
packages contained in the Case; TL Case Qty: The total number of items in each Master Case; Min Order Qty: The smallest Unit that can be
ordered; MM Req: Must order multiples of the Unit in the stated quantities; Ship Wt (Lbs): Total weight of the units per Carton
Catalog UPC Order Unit Unit Units/ TL Case Min MM Ship Wt
Number Number Description Unit Qty Pkg Case Qty Order Qty Req (Lbs)
Stranded Wire Retrofit Fixture Whips
EPW18103 10400 3-18 AWG Stranded Wire: 3/8” Conduit, 10-FT Length - EA 100 BRL 0 0 10 Yes 133
Black, White and Green
EPW18104 10402 4-18 AWG Stranded Wire: 3/8” Conduit, 10-FT Length - EA 100 BRL 0 0 10 Yes 142
Black, Red, White, Green
Solid Wire Retrofit Fixture Whips
EPW18103S 10401 3-18 AWG Solid Wire: 3/8” Conduit, 10-FT Length - EA 100 BRL 0 0 10 Yes 133
Black, White, Green
EPW18104S 10403 2-16 AWG Solid Wire: 3/8” Conduit, 10-FT Length - EA 100 BRL 0 0 10 Yes 142
Black, Red, White, Green
RETROFIT FIXTURE WHIPS WITH DIE CAST
SCREWIN CONNECTORS
n
UL Listed. File Number: E87199.
n
Labor saving Fixture Whips that expedite the installation process when
Contractors upgrade existing fluorescent fixtures with new energy saving ballast.
n
All stranded and solid wire conductors are stripped 5/8” (.625”) from the end
of the conductor and securely tied to prevent damage to the conductors and
eliminate lost lock nuts.
n
Includes Die Cast Screw-In Connectors on each end.
Meets the requirements of the 2014 National Electrical Code: Article 410.137(C) as follows:
Wired luminaire (fixture) sections are paired, with a ballast(s) supplying a lamp or lamps in both. For
interconnection between paired units, it shall be permissible to use metric designator 12 (trade size 3/8”)
flexible metal conduit in lengths not exceeding 7.5 m (25 ft) in conformance with Article 348. Luminaire
(fixture) wire operating at line voltage, supplying only the ballast(s) of one of the paired luminaires (fixtures),
shall be permitted in the same raceway as the lamp supply wires of the paired luminaires (fixtures).






