Cut Sheet

ManualsBrandsEPCO ManualsConversion & Retrofit Kits14090

Specications subject to change without prior notice.

www.engproducts.com

5401

SMETANA DRIVE | MINNETONKA, MN

55343

800.336.1976

| F

800.336.2801

PRODUCT DATA SHEET

LIGHTING PRODUCTS

8-FT T8 RETROFIT KIT

8-FT T8 RETROFIT KIT, PRE-WIRED

TYPICAL APPLICATIONS:

Commercial Buildings

Strip Malls and Shopping Centers

Residential Multi-Dwellings

Buildings

Schools and Recreation Areas

Industrial Buildings

Factories

Warehouses and Storage Buildings

Airport, Train, Bus Terminals, and

other transportation

Outdoor Signage Backlighting

Lightboxes

Other applications where

retrofitting existing systems will

provide energy savings and

improved higher lumen output

FLUORESCENT FIXTURE BRACKET KITS

RETROFIT CONVERSION KITS for STRIPLIGHT FIXTURES

Convert older 4-foot and 8-foot T8 or T12 strip light xtures using magnetic ballast

into energy ecient T5 or T8 luminaires. Each kit includes T5 or T8 Bi-Pin Lamp Sockets,

RetroFit Bracket Socket Plates, and Self-Tapping Screws.

BENEFITS for the FACILITY OWNER and FACILITY MANAGER

Complies with UL Standard 1598B.

When you convert your old light xtures with a simple upgrade to T5 or T8

luminaires using EPCO’s RetroFit Conversion Kit you will realize energy savings

up to 40% and your ROI can be as short as 15 months.

Your original light xture housing is reused. This reduces the retrot conversion

time at half the cost and half the time compared to the installation of a new xture.

The installer only needs to complete ballast lead terminations to nish the retrot

installation.

n

Improved lumen performance.

n

Simplies your lamp inventory to one lamp type and color temperature.

CONTRACTOR BENEFITS

Labor savings! The combination of high eciency ballast, T5 or T8 lamps,

and the low cost of EPCO’s Fixture Bracket RetroFit Conversion Kits is a fast and

easy installation.

Requires minimal rewiring.

Minimal recycling on the jobsite.

Viable retrot opportunities in commercial, industrial, and institutional buildings

that have not converted to the energy ecient T5 or T8 lighting systems.

CONVERT to T8 FLUORESCENT LAMPS

T12 or T8 fluorescent lamps that historically ran on magnetic ballast for general

indoor lighting are becoming extremely difficult, if not impossible to buy.

Upgrade to a very affordable lighting system, using:

EPCO’s Fixture Bracket RetroFit Conversion Kits

T8 Fluorescent lamps

Energy efficient electronic ballast

This combination of components consumes 40% less energy than older lighting

systems. The result is improved lumen output, color characteristics, and efficacy

compared to older magnetic-type lighting systems using T12 and T8 fluorescent

lamps.

4-FT T8 RETROFIT KIT

Summary of content (4 pages)

PAGE 1
PRODUCT DATA SHEET RETROFIT CONVERSION KITS for STRIP-LIGHT FIXTURES 8-FT T8 RETROFIT KIT Convert older 4-foot and 8-foot T8 or T12 strip light fixtures using magnetic ballast into energy efficient T5 or T8 luminaires. Each kit includes T5 or T8 Bi-Pin Lamp Sockets, RetroFit Bracket Socket Plates, and Self-Tapping Screws. BENEFITS for the FACILITY OWNER and FACILITY MANAGER n n n n n n Complies with UL Standard 1598B.
PAGE 2
FLUORESCENT FIXTURE BRACKET KITS T8 FLUORESCENT FIXTURE BRACKET KIT PART NUMBERS Catalog Number UPC Number Description Order Unit Unit Qty Unit Pkg Units/ Case TL Case Qty Min Order Qty MM Req Ship Wt (Lbs) T8 Fluorescent Fixture Bracket RetroFit Conversion Kits (From T12 Fluorescent Lamps) 14050 14050 14050B 14052 14051 14051 14051B 14053 14055 14055 14056 14056 14057 14057 14090 14090 8-FT Fixture Bracket Kit: Uses four (4) T8 Fluorescent Lamps EA 1 BG 10 10 10 Yes 11 8-FT Fix
PAGE 3
FLUORESCENT FIXTURE BRACKET KITS ACCESSORIES WIRING COMPARTMENT/BALLAST COVERS and REFLECTORS P/N 14080: Wiring Compartment/Ballast Cover Tool-less installation. Quickly and easily attaches to the Retrofit Conversion Kit Bracket using 1/4 Turn Retainer Clips. n Complies with the majority of utility rebate requirements. n Optimizes light output and helps to reduce energy consumption. n Wiring Compartment/Ballast Cover (Steel) — P/N 14080: White, Reflectance 92%. n Nominal Length: 4-Feet.
PAGE 4
FLUORESCENT FIXTURE BRACKET KITS PRODUCT WARRANTY Unless otherwise noted, Engineered Products Company (herein known as EPCO) warrants that the products described herein, will be furnished free from defects in material and workmanship for one (1) year. Any exceptions to this Warranty Statement will be detailed within the respective warranty section in this product catalog, noted on the product itself, or the product packaging.