Instruction Manual
check current parameters
check the internal memory of Eobody2 unit.
save current parameters
save current parameters inside the Eobody2 internal memory. Eobody2 has an internal memory to store
parameters settings. You may store an entire installation or performance conguration inside one or more
Eobody2 and keep it (or them) as back-up units for a future use.
init all parameters
initialize to factory settings.
revert to save
go back to the conguration saved last.
all off
disactivate all parameters.
delay
As USB is very fast, some older computer can have problems to receive the high data ow. Increasing the de-
lay will reduce the data ow. It will make Eobody2 analyse the analogue input not every scan cycle.
change name
rename your Eobody2 unit. The new name will be displayed in the section ‘your Eobody name’.
check name
check the name of the Eobody2 unit you are editing when you are editing more than one.
print incoming messages
print to screen incomig MIDI messages.
USB 8 sensor interface / Eobody2 editor
III.3. Eobody2 internal memory conguration