Manual

2-2
2.2 BATTERY HANDLING
2.2.1 Battery Inspection
. Before installation, inspect the
batteries for any cracks, dents, leakage, or bulging. Never
install a defective battery in the AN/PEQ-2A.
WARNING..
Ensure the Mode Selector is turned to the OFF (0)
position before attempting to install, remove or
replace batteries.
2.2.2 Battery Installation
. Unscrew the Battery Caps and
install one AA battery in each compartment as shown in
Figure 2-1. Proper battery orientation is clearly marked on
the AN/PEQ-2A housing. Replace and tighten the Battery
Caps.
Figure 2-1 Battery Installation
Battery Orientation
Markings