Manual

1-7
1.9 DESCRIPTION OF MAJOR COMPONENTS
1.9.1 AN/PEQ-2A Assembly
. The AN/PEQ-2A is a
handheld or weapon mounted, battery operated,
multifunction laser device that emits IR light for precise
weapon aiming and target / area illumination.
1.9.2 Operator and Unit Maintenance Manual
. Provides
detailed operating and maintenance procedures specific to
the AN/PEQ-2A.
1.9.3 Soft Carrying Case
. Protects the AN/PEQ-2A and
accessories while in a field environment.
1.9.4 Strap, Retaining (2)
. May be used alone or in
conjunction with hook and loop fastener tape as an alternate
means of attaching the Remote Cable Switch to the weapon.
1.9.5 Neck Cord
. Used to secure the AN/PEQ-2A to the
operator’s wrist or around the neck.
1.9.6 Hex Key, .050
. Used to remove / install the Safety
Block of the AN/PEQ-2A.
1.9.7 Lens Tissue
. Used to clean the laser ports of the
AN/PEQ-2A.
1.9.8 M4/M16A2 Bracket Assembly
. Used to mount the
AN/PEQ-2A to the M4 Carbine or M16A2 Rifle.
1.9.9 Pattern Generators (set of 5)
. Five pattern generators
(i.e., circle, square, triangle, T-shape, cross) that, when
individually installed over the aim lasers, project a specific
holographic design over the aiming point of the laser.