Operator's Manual

Holographic Window - Contains the embedded holographic reticle pattern that forms a virtual

image of the reticle when illuminated by laser light.

Protective Hood - Preassembled, protective hood increases durability of sight housing and

protects the sight from impact damage.

Battery Cap Latch - A cam lever that secures the removable battery compartment to the sight

and prevents water, dirt, or grime from entering the battery housing.

Battery Cap- Protective housing that contains the power source for the HWS. The compartment

is easily and quickly removed for the replacement of batteries.

Universal Mount - Ambidextrous, quick release base mounts to either a 1” (25.4mm) Weaver

or MIL-STD-1913 rail. Adjustable lever accommodates all MIL-STD 1913 rail tolerances.

Windage Adjustment - Adjusts the point of aim at 100 yards approx.

/2 inch per click in a

leftward and rightward direction when zeroing.

Elevation Adjustment - Adjusts the point of aim at 100 yards approx.

/2 inch per click in an

upward and downward direction when zeroing.

On/Off, NV Mode, and Brightness Switches - Raised button control interface allows the

operator to perform and adjust user settings for appropriate and preferred conditions (see page

14).