D2203D Menu MUTE Disp Audio SEL - Video + SYS Exit BND/ SRC MIC D2203D
Thank you for buying this product, please read through these operating instructions, so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference .
PRECAUTIONS 1. Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicles electrical system. 2. Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body. 3.Make sure all the connections are completely correct before turning on your unit. 4.
PRECAUTIONS F This unit can play the following discs only: Type of disc Label on the disc Recorded material Size of disc Sound and moving pictures 12cm VCD Sound and moving pictures 12cm CD Sound only 12cm MP3 Sound only 12cm DVD TM V I D E O NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc. *Do not attempt to modify the unit, modifying the unit may cause an accident. *Stop the vehicle before carrying out any operation that could interfere with your driving.
FRONT PANEL 12 SEL SRC 1 2 3 4 BAND/ MIC MUTE 5 6 7 8 9 10 11 13 14 4
FRONT PANEL 1.AUX IN Connect the audio cable to the unit then you can enjoy the music. 2. PWR/MUTE Press the button to turn on the unit and press and hold the button to turn off the unit. In power on, press to shut off the sound output and press it again to resume previous sound. 3. >>I/I<< In radio mode, press to manual seek a station. Long press to automatic seek a station. In playback mode, long press to select fast forward or fast backward. Press to select last or next track(chapter) 4. RESET 5.
MENU SYSTEM The users can perform operation by touching screen directly. Radio Operation 1 2 3 6 7 Page1 4 5 8 9 10 1. HALF LIGHT MODE Turn on /off the backlight. (The function can be used to change the screen brightness while traveling at night) 2. SOURCE To display the SOURCE screen 3.Station preset button To display the preset station list (touch one of the station preset button to recall the radio which stored on the position; long touch to save the current frequency into the station) 4.
RDS Operation EON:OFF REG:OFF PTY:NONE 1 2 3 TA 87.50MHz PS: RT: PTY: AF PTY Seek- Seek+ Page2 1.TA To turn on /off TA function 2.AF To turn on /off AF function 3.PTY To switch RDS program type 4.Page2 To switch to radio operation page. 5.SEEK-/SEEK+ To seek a station automatically. To seek a station manually(long touch). 4 5 EON(Enhanced Other Networks) ON: Active the EON function, the receiver automatically tunes in the station that broadcasts the traffic information when it occurs.
1.PLAY To start the playback. 2.PAUSE To pause the playback. 3.STOP To stop playing, touch twice to stop completely. 4.MENU To display the DVD SETUP screen. 5.PREV/NEXT To select previous/next chapter or track. NOTE:Touching the left middle position twice to display the TITLE MENU selection screen, touching the right middle position twice to display the ROOT MENU selection screen, touching the right top position to display the number keyboard.
The phone book screen 4 1 2 3 1. To display a telephone number list of the received calls 2. To display a telephone number list of the dialed calls 3. To display a telephone number list of the received but you missed 4. >> To change the list page The Bluetooth Setup screen 1 2 3 4 6 7 5 8 1. LINK To connect the Bluetooth device. 2. PAIR To pair up the Bluetooth device. 3. DISCON To disconnect the Bluetooth device 4. RESET To reset the unit if there is something wrong with the Bluetooth function. 5.
Setup Operation TOUCH ON THE TOP LEFT POSITION TO ENTER SOURCE INTERFACE. The unit will return to the previous mode if no operation is performed in 5 seconds. Menu Disp Audio Video SYS Exit 1 2 3 6 5 4 1.Menu To display the source selection screen. Menu Disp Audio Video SYS Exit Touch the item to select source displayed on the unit screen. 2. Disp To display the relative information. HH:MM:SS NOW:RADIO DRIVE:DISC * It is unavailable in AUX or TV mode.
TOUCHING CONTROL OPERATION 3.Audio Touch on the AUDIO button and the screen will display as following: Volume L-front R-front Menu Disp Audio Video SYS Exit In this menu, there are items of Volume, L-front,R-fornt, L-rear, R-rear , Subwoof, Bass, Middle and Treble can be adjusted. Touch on the button to adjust each item and touch on button to turn pages and select the item listed above. 4.
SYSTEM SETUP OPERATION Clock Sys Switch page button Key Beep Local Area Menu Disp Audio Video SYS Exit Clock Sys Set the time display mode(12H/24H) Key Beep Turn on/off the sound guide function ON:activate the sound guide mode OFF:deactivate the sound guide mode. The sound guide beep will not be produced when a button on the unit is pressed. Local Area Touch the provided option to change the radio frequency for different country.
Subwoof freq BassQ factor MidQ factor Menu Disp Audio Video SYS Exit Touch the provided option to change the sub woof ,the bass and middle quality factor. Back Bright Back light Menu Disp Audio Video SYS Exit Back Bright(dimmer) The function to adjust the brightness of the backlighting for easier viewing. (Normal status's 20%,40%,60%,80% ) Back light The function to set the backlighting duration.
Clock Adjust Touch Adjust Menu Disp Audio Video SYS Exit Clock Adjust Adjust the time by touch To select the desired item then set up (hour, minute, second) To change the display number Touch Adjust When the display position on the screen and the touch position on the touch panel do not match, or using the product at first time, the adjustment becomes necessary. X < - press it Accurately touch the X mark provided in the screen for more than 2 seconds until the adjust succeed is displayed .
REMOTE CONTROL 15 16 1 2 3 4 17 5 6 7 8 18 19 20 9 21 10 PTY AF TA 11 12 13 14 1.PWR/ 5. PROG/A-B 9. [ / ][ / 12. ZOOM/AF 16. LOUD/ 19. 23. SETUP 2. EQ/ 3. ANGLE/AMS 6. OSD/ 7. GOTO/ ][ / / / ]/ENTER 10. RPT 14. VOL-/SEL/VOL+ 13. SRC/IR-SW 17. 0-9 Number button 20. TITLE 21. 24. AUDIO/ST 25. RDM/TA 22 23 24 25 4. SUB-T/LOC 8. MENU /PTY 11. 15. 18. CLEAR 22.
REMOTE CONTROL Installing the battery Slide the tray out on the back of the remote control and insert the battery with the plus (+)and minus(-)poles pointing in the proper direction. Use and care of the remote control Point the remote control in the direction of the front panel to operate to use it. Notes: Using batteries improperly can cause them to explode. Take note of the following points: * Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.
REMOTE CONTROL 1. POWER/ Press the button to turn on the unit; Press and hold for 1 second or longer to turn off the unit. In power on, press to mute the device. Press it again to resume previous sound level. 2. EQ/ Press to select the corresponding preset modes to adjust the sound quality. In bluetooth mode, press this button to dial up a call. 3. ANGLE/AMS Press to change the viewing angle in DVD mode; In radio mode, press to browse each stored station. Long press to scan and store station automatically.
11. /PTY In radio mode, press this button to switch to RDS program type. In DVD/VCD mode, press to play slowly. 12. ZOOM/AF In radio mode, press this button to function AF on/off. In DVD/VCD mode, press to increase or decrease the picture in size. 13. SRC/IR-SW Press the button repeatedly to switch sources. Press and hold this button to change the IR to control front or rear source.(*It is disable when rear source shut off.) 14. VOL-/SEL/VOL+ Press VOL-/VOL+ to adjust volume.
BASIC OPERATION ¼ò¹ µÊ ¥Å ÕÅ ÏÖ ³¸ ýÄÏ 1.Reset the Unit Operating the unit for the first time or after replacing the car battery, you must reset the unit.Press RESET button on the head unit with a pointed object, (such as a ballpoint pen) to set the unit to initial status. *This function can only be operated by the head unit. 2.Turning the Unit On/Off Press PWR/ button on the remote control to turn on the unit. In unit ON, when insert a disc, the unit will automatically start playing.
RADIO OPERATION Selecting the radio mode, the TFT display as the follows: Display the current status Page1 1.Band Selector In radio mode, repeatedly press BAND button on the remote control to select a band in the following order: FM1 FM3 FM2 MW2 MW1 *Pressing BAND on the touchable screen or on the panel also performs the same operation. 2.Manual/Automatic Tuning (1).Automatic Tuning: Press / button on the remote control to search for a station in the direction of lower frequency or higher frequency.
(2).It is switched to DX mode when Loc: OFF is pressed again. Both strong and weak stations can be received. Note: * The initial mode is DX mode. 6.MO/ST Selector In FM of radio mode, you can press ST button on the remote control to select Mono mode or Stereo mode. RDS (RADIO DATA SYSTEM) OPERATION The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically retune to a stronger transmitter that is broadcasting the same programme.
PTY(Programme Type)Tuning The PTY function allows you to search for stations with a particular Program Type. Touching Page1 button on the radio display screen to switch to the RDS screen EON:OFF REG:OFF 87.50MHz PTY:NONE PS: RT: TA PTY: AF PTY Seek- Seek+ Page2 1.Press PTY button on touchable screen or on the remote control to select a programme type. After selecting the programme type for 3 seconds, the unit will search for a station in the selected programme type.
BLUETOOTH OPERATION HANDS-FREE PHONE The unit is compatible with Bluetooth international standard wireless communisation technology. You can place a hands-free call by using a Bluetooth compatible with the mobile phone. *When you place a call, speak loudly and clearly. *Shut the windows before calling. *It is normal that some unnatural voice may be heard during your calling which may be caused by the conditions of the signals or the one who use the mobile phone.
Dialling a call 1. Input the number required by pressing number button on the remote control or on the screen then press button on the screen to dial up. The telephone number you dialled is appeared on the screen 2.Placing a call by history: Press button to switch to PHONE BOOK screen. You can place a call by selecting a person from a list of received calls dialed calls or missed calls. A maximum of 16 numbers can be stored in each call history.
BLUETOOTH AUDIO FUNCTION Audio information of a bluetooth compatible mobile phone, portable player, etc., is by wireless controllable/playable from the unit. Refer to CONNECT to connect bluetooth audio devices. Refer to bluetooth setup(PAGE6) for operation *video playback is not supported.
DVB-T OPERATION This equipment will serve you with the available received channels supplied by the mobile signals. Press SRC button on the panel or on the remote control or touch on the left top of the screen then select TV mode. Touch at random area to start the operation. Display setup Main menu: 1 3 4 2 5 1. To display the channel list 2. To be back to previous interface 3. To adjust the volume control 4. To display the main menu 5.
DVD/VCD/CD OPERATIONS Loading a disc 1.Press button to open the front panel. 2. Insert a disc into the Disc slot the unit switch to the DVD mode automatically * You can eject a disc by pressing button on the unit. Quick track selection fast forward/fast reward playback During playback mode, press / button to select next/previous chapter or track. *Press / button on the unit also perform the same operation. Press the / button on the remote control to perform fast reward or fast forward.
12 18 14 Normal Play 1 16 This function is operated by using the remote control. Increase or decrease the size of the picture During DVD/VCD playback, press ZOOM button to increase or decrease the picture size. There are 6 sizes, and press the button repeatedly to change the size in following order. 2X OFF 14 3X 4X 12 13 *This function is operated by using the remote control.
Selecting different title (DVD mode) For DVD disc, you can press TITLE on the remote control to return the top menu of the disc, and you can select different chapter or title upward or downward by using or . *Touching the screen also perform the same function(refer to page 7 Multi-player operation for detail). Selecting root menu(DVD mode) For DVD disc, you can press MENU to select different root menus, and then press [ENTER] buttons to enter the sub-menus.
SYSTEM SETUP When you press SETUP button on the remote control, or press SETUP button on the screen, the setup menu will be displayed. It includes General Setting, Audio Setup, Preference ,Password Setup and Exit Setup menu. 1.Within the setup menu, you can use [ ][ ][ ][ ] buttons on the remote control to move the cursor, and then press the ENTER button to make your selection.Press [ ] can return to the previous menu. 2.
User can select digital audio setup or dolby digital setup. AUDIO SETUP PAGE DIGITAL AUDIO DOLBY DIGITAL SETUP GO TO AUDIO SETUP PAGE 2.1 DIGITAL OUTPUT SETUP DIGITAL AUDIO PAGE SPDIF OFF DIGITAL OUTPUT OFF 48KHz SPDIF RAW LPCM OUTPUT SPDIF PCM SETUP SPDIF - SPDIF OFF: An analog surround sound format is output through the back-panel connections for L,R,LS,RS and centre speakers, and the subwoofer simulation. -SPDIF RAW: outputs the analog surround sound format and digital audio signal.
PREFERENCE PAGE ENG AUDIO ENG SUBTITLE ENG DISC MENU PARENTAL DEFAULT ENGLISH FRENCH SPANISH PORTUGUES JAPANESE KOREAN RUSSIAN THAI PREFERRED AUDIO LANGUAGE 3.2 SUBTITLE SUBTITLE: Sets the preferred subtitle language as the default when playing DVD.(if DVD support these languages). PREFERENCE PAGE AUDIO ENG ENG SUBTITLE ENG DISC MENU PARENTAL DEFAULT ENGLISH FRENCH SPANISH PORTUGUES JAPANESE KOREAN RUSSIAN THAI PREFERRED SUBTITLE LANGUAGE 3.
PREFERENCE PAGE AUDIO ENG ENG SUBTITLE ENG DISC MENU PARENTAL DEFAULT RESET LOAD FACTORY SETTING 4. PASSWORD SETUP PAGE 4.1 PASSWORD MODE PASSWORD MODE: Sets the function operation to locking the parental function. ON: Using the parental control must input the password. OFF: You can not input the password to change the parental control. * The initial password is 136900. PASSWORD SETUP PAGE PASSWORD MODE PASSWORD ON ON OFF PASSWORD MODE 4.
SETTING THE TV SCREEN SIZE Multi-aspect ratios suit to different TV screen size. Picture format on Disc TV Screen Size 16:9 4:3 Pan Scan Letter-box Wide Screen 4:3 16:9 Function supported by DVD discs There are many functions available on DVD discs and the functions vary per player and per manufacturer.
MP3 OPERATION Playing a disc, an SD/MMC card or a USB device containing MP3 files Connect a USB device or press button to open the front panel, insert a disc into the disc slot or SD/MMC card into the card slot. The unit will automatically switch on when a disc, card or USB device is inserted. The screen will display as follow: Touch this area to display number keyboard.
Stop playing When playing MP3 files, press button on the remote control to stop playback. Pause playback Press the button on the remote control or press PAUSE button on the touchable screen while playing, press it again or press PLAY button on the touchable screen to return to normal playback. Fast-forward/fast-backward playing Press / button on the remote control to select the speed of fast playing in backward or forward direction: 2 --4 --8 --16 --32 -*Long press function.
INSTALLATION Notes Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. Use only the parts included with unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
INSTALLATION Install the unit After inserting the holder into the dash-board,select the appropriate tabs according to the thickness of the dash-board material and bend them.(Install as firmly as possible using the top and bottom tabs. To secure, bend the tabs 90 degrees.) Insert the keys supplied to the unit at both sides of the unit (shown as illustrated)until they click. Pulling the keys makes it possible to remove the unit from the dashboard.
TROUBLE SHOOTING Common problems Symptom Cause Remedy Power doesn't switch ON . The unit doesn't operate. Leads and connectors are incorrectly connected. Confirm once more that all connections are correct. A fuse has blown. Fix the problem causing the blown fuse and replace the old fuse with a new one of the same capacity. Noise and other factors are causing the built-in microprocessor to operate incorrectly. Reset the unit. The remote control operation mode is incorrect.
Problem during DVD playback Symptom Cause Remedy Playback is not possible The loaded disc has a different region number from this unit Replace the disc with one featuring the same region number as this unit Dialog language (and subtitle language) can not be switched. The DVD playing does not feature multiple language recordings.
CABLE CONNECTION DVB-T 17 ACCESSORIES Mounting Bracket (Half Sleeve) -------------------------------------------------------X1 Removable Trim Ring equipped on the unit ----------------------------------------X1 Mounting Screw M5 --------------------------------------------------------------------- X1 Washer ------------------------------------------------------------------------------------- X1 Rubber ------------------------------------------------------------------------------------- X1 Remote Control -
SPECIFICATON GENERAL power requirement ---------------------------------------------- 12VDC(10.
