User Guide
Table Of Contents
- IMPORTANT SAFEGUARDS
- Before using the electrical appliance, the followi
- 1.Read all instructions.
- 2.Before use check that the voltage of wall outlet c
- 3.Do not operate any appliance with a damaged cord o
- 4.If the supply cord is damaged it must be replaced
- 5.Unplug from outlet when not in use, before putting
- 6.Care shall be taken when handling the sharp cuttin
- 7.Do not let cord hang over edge of table or hot sur
- 8.Do not immerse the motorized base in liquid, or pl
- 9.Close supervision is necessary when your appliance
- 10.Ensure fingers are kept well away from moving part
- 11.Do not remove cover until blade has completely sto
- 12.Do not attempt operation without the cover being i
- 13.Do not run the appliance without load.
- 14.The use of accessory not recommended by the manufa
- 15.Immediately turn off the appliance and send it to
- 16.Remove the dust and other foreign objects from the
- 17.It is forbidden to disassemble, repair and rebuild
- 18.After each use, turn the grind control to the "1"
- 19.Do not plug and unplug the appliance with wet hand
- 20.Do not drag or bind the power cord.
- 21.Do not shake or drop the appliance strongly.
- 22.Check grinding chamber for presence of foreign obj
- 23. This appliance is not intended for used by person
- 24.Children should be supervised to ensure that they
- 25.Misuse may cause potential injury.
- 26.Do not operate the appliance for other than its in
- 27.Do not use outdoors.
- KNOW YOUR COFFEE GRINDER
- BEFORE THE FIRST TIME
- 1.Carefully unpack your coffee grinder and remove al
- 2.To remove any dust that may have accumulated durin
- 3.Rinse the bean box, bean box lid, ground coffee co
- OPERATION
- I. GRIND COFFEE BEANS AUTOMATICALLY
- II. GRIND COFFEE BEANS MANUALLY
5
2. To remove any dust that may have accumulated during packaging.
3. Rinse the bean box, bean box lid, ground coffee container lid and ground coffee container
with water and then dry thoroughly.
CAUTION: Never immerse the body in water for cleaning and do not fill the grinding unit
with water for cleaning.
OPERATION
I. GRIND COFFEE BEANS AUTOMATICALLY
1. Place the coffee grinder on a flat surface.
2. Check and make sure that the coffee channel outlet cover must be closed well (see Fig.1),
otherwise, the grinding unit can be not installed well and the appliance can not work.
Please push the coffee channel outlet cover clockwise to close it well in position if the
coffee channel outlet cover is not closed.
Coffee channel outlet cover
(at the bottom of upper body)
Fig.1