User Guide

ManualsBrandsENZOO ManualsCoffee GrindersBurr Coffee Grinder, Conical Electric Coffee Bean Grinder with Detachable Design for Easy Cleaning, Portafilter Attachment, Built-in Timer, Cleaning Brush and Measuring Scoop Included, Black

Table Of Contents

INSTRUCTION MANUAL

Conical Burr Coffee Grinder

HAVE QUESTIONS? WE'RE HERE TO HELP! Enzoo is committed to your satisfaction. If you have questions,

just contact us to have them answered immediately without leaving the comfort of your home.

Enzooservice@gmail.com

Read this manual thoroughly before using and save it for future reference

Summary of content (11 pages)

PAGE 1
INSTRUCTION MANUAL Conical Burr Coffee Grinder HAVE QUESTIONS? WE'RE HERE TO HELP! Enzoo is committed to your satisfaction. If you have questions, just contact us to have them answered immediately without leaving the comfort of your home. Enzooservice@gmail.
PAGE 2
IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Read all instructions. 2. Before use check that the voltage of wall outlet correspond to the one shown on the rating plate. 3. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner.
PAGE 3
15. Immediately turn off the appliance and send it to the authorized service agent for repair if abnormal sound, abnormal taste, excessive heat and smoke are found during use. 16. Remove the dust and other foreign objects from the appliance before use. 17. It is forbidden to disassemble, repair and rebuild the body. 18. After each use, turn the grind control to the "1" position and ensure that the motor stops completely before disassemble. 19.
PAGE 4
KNOW YOUR COFFEE GRINDER BEFORE THE FIRST TIME 1. Carefully unpack your coffee grinder and remove all packing materials.
PAGE 5
2. To remove any dust that may have accumulated during packaging. 3. Rinse the bean box, bean box lid, ground coffee container lid and ground coffee container with water and then dry thoroughly. CAUTION: Never immerse the body in water for cleaning and do not fill the grinding unit with water for cleaning. OPERATION I. GRIND COFFEE BEANS AUTOMATICALLY 1. Place the coffee grinder on a flat surface. 2. Check and make sure that the coffee channel outlet cover must be closed well (see Fig.
PAGE 6
3. Install the grinding unit onto the upper body as follows: Firstly, align the “ ” symbol on the grinding unit with the “ ” symbol on the upper body (see Fig.2), then rotate the grinding unit clockwise until the “ ” symbol aligns with the “ ” symbol (see Fig.3) .
PAGE 7
Fig.4 Fig.5 5. Pour appropriate amount of coffee beans into the bean box, it must be noted the quantity of coffee beans shall not exceed 240g. 6. Close the bean box lid. 7. Put the ground coffee container (with lid in position) on the ground coffee container holder. Ensure that the opening of ground coffee container shall align with the ground coffee outlet. 8. Turn the grind control dial to select your desired particle size of ground coffee. Turn it to the left, the particle size will be finer and finer.
PAGE 8
10. Connect the appliance with the power source, all the indicators blinks for three times, then the corresponding indicators of three buttons illuminate, and the indicator of “ ” lights up. 11. Press the Start/Stop button, its corresponding indicator blinks and the indicators of other two buttons extinguish, and the appliance starts to run. NOTES: (1) The appliance will enter into the sleep state if no any operation within 90 seconds after plug in.
PAGE 9
II. GRIND COFFEE BEANS MANUALLY 1. Follow the operations of Step 1-6 of “GRIND COFFEE BEANS AUTOMATICALLY” . 2. Turn the grind control dial to select your desired particle size of ground coffee. 3. Connect the appliance with the power source. 4. Install the funnel bracket well, put the high-pressurized funnel onto the funnel bracket and then push the funnel towards the funnel bracket (see Fig.6), the indicator of “ ” turns on. 5. Press the Start/Stop button and the appliance starts to run.
PAGE 10
2. Disassemble the grinding unit by following the operation mentioned above, then detach the ground coffee outlet cover and clean the residual coffee powder on the grinding wheel and grinding blade with a brush, and then pour the residual ground coffee out. Finally, replace the grinding unit well in place. The grinding unit can not be put into the dishwasher for cleaning. NOTE: Please operate carefully as the grinding wheel & grinding blade are sharp.
PAGE 11