SDS
Refresh
Revision Date:
11-May-2015
_____________________________________________________________________________________________
Page 2 / 6
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
CAS No
Weight
-
%
Water 7732-18-5 60-100
Alcohols, C9-11 ethoxylated 68439-46-3 1-5
Sodium Xylene Sulfonate 1300-72-7 1-5
Diethylene Glycol Monobutyl Ether 112-34-5 1-5
Non-Pathogenic Bacterial Spores Proprietary 1-5
**If Chemical Name/CAS No is "proprietary" and/or Weight-% is listed as a range, the specific chemical identity and/or percentage
of composition has been withheld as a trade secret.**
4. FIRST
-
AID MEASURES
First Aid Measures
Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If
eye irritation persists: Get medical advice/attention.
Skin Contact
If skin irritation occurs, rinse affected area with water.
Inhalation
No known hazardous effects. If symptoms occur, remove to fresh air.
Ingestion
Drink plenty of water. If any discomfort persists, obtain medical attention.
Most Important Symptoms and Effects
Symptoms
Prolonged contact may cause painful stinging or burning of eyes and lids, watering of eye,
and irritation. Prolonged or repeated skin contact may cause irritation.
Indication of any Immediate Medical Attention and Special Treatment Needed
Notes to Physician
Treat symptomatically.
5. FIRE
-
FIGHTING MEASURES
Suitable Extinguishing Media
Water spray (fog). Carbon dioxide (CO2). Dry chemical. Foam.
Unsuitable Extinguishing Media
Not determined.
Specific Hazards Arising from the Chemical
None known.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment and Emergency Procedures
Personal Precautions
Use personal protective equipment as required.
Environmental Precautions
Avoid release to the environment.
Methods and Material for Containment and Cleaning Up
Methods for Containment
Prevent further leakage or spillage if safe to do so.
Meth
ods for Clean
-
Up
Collect spillage. Collect in a clean, dry waste container for disposal. After cleaning, flush
away traces with water.
7. HANDLING AND STORAGE