Specifications

Diagrams are for reference only.

Consult the appropriate installation sheet for wiring details.

OUTPUT MODULES (GANG MOUNT)OUTPUT MODULES (GANG MOUNT)

OUTPUT MODULES (GANG MOUNT)

SIGNATURE MODULES

SIGA-CC2 Wiring

The SIGA-UM Universal Class A/B Module is installed to a

standard North American 2-gang electrical box. Separate I/O

and data loop connections are made to each module. The

SIGA-UM may be used to connect any one of the following:

two Class B or one Class A Initiating Device Circuits; one

Class A or B Notification Appliance Circuit; one Class A or

B Circuit for 2-wire Smoke Detectors; one Form “C”

(NO/NC) Dry Output Contact Relay.

SIGA-CC1 Single Input Signal Modules and SIGA-CC2

Dual Input Signal Modules are used for connecting,

upon command from the loop controller, supervised Class B signal or telephone circuits

to their respective power inputs. The power inputs may be polarized 24 Vdc to operate

audible and visible signal appliances or 25 and 70 VRMS to operate audio evacuation

speakers and firefighter’s telephones. The actual operation of the SIGA-CC1 and

SIGA-CC2 is determined by the “personality code” selected by the installer.

UL/ULC Listed

47K EOLW

UL/ULC Listed

47K EOLW

Typical Notification Appliance Circuit

Typical Speaker Circuit

Personality

Code 7

Personality

Code 7

Bi-polar Transient Protector

(P/N 235196P)

