Specifications

Diagrams are for reference only.

Consult the appropriate installation sheet for wiring details.

GENESISGENESIS

GENESIS

NOTIFICATION APPLIANCES

Genesis (wall mount) Chimes, Chime-strobes: GC-HVDM

The Genesis line of signals are the smallest, most

compact audible-visible emergency signaling devices in

the world. Speaker-strobes feature 15, 30, 75 or 110

candela output, selectable with a conveniently-located

switch on the bottom of the device. All Genesis strobes

self-synchronize when installed with the Genesis Signal

Master or SIGA-CC1S module.

Genesis chimes automatically pulse at 60 strokes per minute, when steady (non-

stroked) voltage is applied, or may be field-configured for temporal output. When

installed with a GIM Signal Master Module, the chime may also be field-configured for

coded operation, which enables the chime output to match the rate that voltage is

applied to the circuit. Peak output level is 79 dBA (peak). The chime may be set for low

dB output with a jumper cut that reduces sound output by about 5 dB.

Models:

G1-CVM Genesis Chime-Strobe (selectable 15, 30, 75, or 110 cd output,

selectable high/low dB output)

G1-C Genesis Chime (selectable high/low dB output)

G1F-CVM Genesis Chime-Strobe (selectable 15, 30, 75, or 110 cd output,

selectable high/low dB output) – with "FIRE" marking

G1F-C Genesis Chime (selectable high/low dB output) – with "FIRE" marking

SIGA-CC1S Intelligent Synchronization Output Module (2-gang)

SIGA-MCC1S Intelligent Synchronization Output Module (Plug-in UIO)

Note: Strobes must have continuous voltage.

Polarity shown in

alarm condition

To next device

or end of line

device

C c

Chime Wiring

