Specifications

18
Diagrams are for reference only.
Consult the appropriate installation sheet for wiring details.
TM
CONTROL PANELS
CIRCUIT REFERENCE TABLE - QUICKSTART (QS1, QS4, QSC)CIRCUIT REFERENCE TABLE - QUICKSTART (QS1, QS4, QSC)
CIRCUIT REFERENCE TABLE - QUICKSTART (QS1, QS4, QSC)CIRCUIT REFERENCE TABLE - QUICKSTART (QS1, QS4, QSC)
CIRCUIT REFERENCE TABLE - QUICKSTART (QS1, QS4, QSC)
For cable part numbers turn to the Paige/EST Cross Reference Table on the page indicated
Ref/Pg
Circuit Type Gauges Description Notes
A 95
Initiating Device Circuit (IDC)
18 AWG to 12 AWG
TFN, THHN, FPL, FPLR, FPLP
Input circuits on ZB16-4, ZA8-2 and modules (CT1, CT2, WTM, MM, UM & MAB)
B 95
Notification Appliance Circuit (NAC) 24 Vdc
18 AWG to 12 AWG
TFN, THHN, FPL, FPLR, FPLP
Output Circuits on SLIC, ZB16-4, ZA8-2, and modules (CC1, CC2, UM, & MAB)
D 95 Signature Addressable Loop 18 AWG to 12 AWG
TFN, THHN, FPL, FPLR, FPLP
Loop Controller (SLIC) card to addressable devices
I 95
24 Vdc Power distribution (Smoke Acc. & AUX Power)
18 AWG to 12 AWG
TFN, THHN, FPL, FPLR, FPLP
4 Wire Detector/Relay/Annc. AWG depends on voltage drop
N 95 Relay Module (ZR8) 18 AWG to 12 AWG
TFN, THHN, FPL, FPLR, FPLP
Eight dry contact relays (ZR8) Form A or B configurable.
R -
Telephone Line - DACT connection to RJ31X jack
7 ft cable supplied with FSDACT supplied with DACT Terminal to Plug cable
S 99
RS-232 Communications (Printer Wiring)
18 AWG 4 cond. min. FPL, FPLR, FPLP 50 Ft Max. Panel to Printer
U 98
Communications Network RS-485
18 AWG to 12 AWG FPL, FPLR, FPLP
Annunciator to Panel and Network Annunciator
For maximum wire lengths see the tables, formulas and matrix in the reference section.
For more detail on wiring specifications refer to the product manuals and installation sheets for the specific product.