Specifications

EST3 SUBMITTAL GUIDE
This EST3 Submittal Guide has been designed to
make your job as easy as possible. The guide
includes concise descriptions and relevant drawings
for all EST3-related components. Adjacent to each
component entry is a place for you to indicate that it
is to be included in the submittal. Four simple steps
now accomplish what used to be a tedious task...
Step One
On the reverse of this flap, rough out your
submittal by indicating on the list which products
are to be included.
Step Two
With the flap open, turn to each entry indicated
on the “rough-out” and choose the specific
components that are to be included by placing
checkmarks in the boxes provided.
Step Three
Attach your business card to the outside front
cover of the guide and sign and date the cover
letter on page i.
Step Four
Fill out the bottom portion of this card, remove it
from the back cover, and file it with your notes on
the project for future reference.
Project _________________________________________
Date ___________________________________________
Firm ___________________________________________
Contact _________________________________________
Phone __________________________________________
Submitted by ____________________________________
Notes
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
GE Security wishes you the best of luck
with all your submittal plans!
Detach before submitting this guide.
SUBMITTAL PLANNER
Rough out your submittal by indicating here the
basic components of the package. Then, with
this flap open, turn to the corresponding page
and indicate the specific products to include.
Detach before submitting this guide.
EST3 Network
 Central Processor Unit, p. 3
 Network Communication Card, p. 3
 RS-232 Communication Card, p. 3
 Short Haul Modem Interface, p. 3
 Single Signature Driver Controller, p. 4
 Addressable Analog Device Controller, p. 5
 Initiating Device Circuit (Hardwired) Module, p. 5
 Off Premise Signaling Module, p. 6
 Fiber Optics Communications Interface, p. 6
 Modem Communicator, p. 7
 Liquid Crystal Display Modules, p. 8
 Control Display Modules, p. 8
 FireWorks, p. 9
 Envoy Graphic Annunciator, p. 10
 Remote Annunciators, p. 11
 Remote Annunciator Cabinets, p. 11
 Video Display Utility, p. 11
 Ethernet Networking p. 12
 Audio and Telephone Masters, p. 13
 Audio Amplifiers (Banked), p. 14
 Remote Microphones, p. 14
 Security/Access Control Module, p. 15
 Keypad/Display, p. 15
 Card Reader Controller, p. 16
 Proximity Card Readers, p. 17
 Proximity Access Cards, p. 18
 Proximity Key Fobs and Tags, p. 18
 12 Vdc Regulator with Security Interface, p. 18
 Lobby Enclosures, p. 19
 Remote Closet Enclosures, p. 19
 Chassis Assemblies, p. 19
 Main Panel Power Supplies, p. 20
 Battery Distribution Unit, p. 20
 Remote Booster Power Supply, p. 21
 Batteries, p. 21
 Remote Diagnostic Utility, p. 22
 Serial Printer, p. 22
 RS-232 Optical Isolator Card, p. 23
 CDR-3 Coder, p. 23
 March Time Module, p. 23
 Network Short Haul Modem, p. 23
 Ground Fault Detection Module, p. 24
 Communications Bridge, p. 24
 Alphanumeric Pager Interface, p. 24
Intelligent Analog Initiating Devices
 Signature Multisensor Detectors, p. 26
 Signature Photoelectric Detectors, p. 26
 Signature Ionization Detectors, p. 26
 Signature Heat Detectors, p. 26
 Signature Motion Detectors, p. 27
 Signature Duct Smoke Detectors, p. 28
 Audible (Sounder) Detector Base, p. 27
 Standard Detector Base, p. 27
 Isolator Detector Base, p. 27
 Relay Detector Base, p. 27
 Intelligent Input/Output Modules, p. 28
 Universal Input/Output (UIO) Motherboards, p. 32
 Dual Input Security Module, p. 33
 Releasing Module, p. 33
 Single Action Pull Stations, p. 34
 Double Action Pull Stations, p. 34
 Audio Amplifiers, p. 35
 Auxiliary Power Supplies, p. 35
Notification Appliances
 Genesis Wall Horns and Horn/strobes, p. 39
 Genesis Speakers and Speaker/strobes, p. 40
 Signal Master, p. 40
 Genesis Ceiling Horns, Speakers, Strobes, p. 41
 Integrity Harsh Environment Signals, p. 42
 Single Stroke Chimes, p. 43
 Multiple Tone Signals, p. 43
 Fire Alarm Bells, p. 43
 Firefighters’ Telephones, p. 43
Hazardous Location Devices
 Hazardous Location Heat Detectors, p. 46
 Hazardous Location Pull Stations, p. 46
 Hazardous Location Signals, p. 47
Door Holders & Relays
 Door Holders, p. 48
 Relays, p. 49
Detectors
Bases
Network
Control
Local Rail
Modules
Power Supplies
Display &
Networking
Network
Audio
Remote
Annunciation
Cabinets &
Chassis
Network
Accessories
Input/Output
Modules
Manual Pull
Stations
Amplifiers
& Power Supplies
Visible/Audible
Signals
Audible Signals
Security/Access
Control