Specifications

Door Holders
& Relays
48
EST3
Network
SUBMIT



EST3
EST3
EST3
EST3
Door Holders & Relays
Initiating
Devices
Notification
Appliances
Hazardous Location
Devices
Door Holders
Electromagnetic Door Holders
GE Security electromagnetic door holders keep doors open until signaled by
the fire alarm system, a heat detector, a smoke detector, or an electrical
switch. Door holders should be installed wherever doors may be effectively
used to confine smoke and fire, or where the release of a self-closing door from
a remote location is required. Fail-safe operation is an inherent feature of
these door holders. If power fails, doors are released automatically, but may
be opened or closed manually at any time. All units are free of moving parts,
are self-contained, and require no maintenance. Door holders have a holding
force of approximately 15-25 Lbf (66-111N).
1501-AQN5 (Single Door) 1502-AQN5 (Double Door) Floor Mounted Catalog Sheet: 85001-0421
1504-AQN5 (Long Catch Plate) 1505-AQN5 (Short Catch Plate) Flush Wall Mounted Catalog Sheet: 85001-0421
1508-AQN5 (Surface) 1505-AQN9 (Completely flush) Wall Mounted Catalog Sheet: 85001-0421
1500-1 (1.5” Extension) 1500-2 (2.5” Extension) Catch Plate Catalog Sheet: 85001-0421
1500-7 (5.25 to 7.5” Extension) 1500-12 (7.5 to 12” Extension) Catch Plate Catalog Sheet: 85001-0421
CS2595-5 (short) CS2598-5 (long) Replacement Armature Catalog Sheet: 85001-0421
Relays
Four-Voltage SPDT/DPDT Control Relays
MR Series multi-voltage control relays are ideal for applications where local contacts are
required for system status, remote contacts, or for control of electrical loads and general
purpose switching. They are suitable for use with HVAC temperature control, fire alarm,
security, energy management, and lighting control systems. Relays provide 10-Amp con-
tacts, which may be operated by one of four input control voltages. Each relay position
contains a red LED that indicates the relay coil is energized. Relays may be snapped apart
from a standard four-module assembly and used independently.
MR-101/T (with mounting hardware) MR-101/C (in metal enclosure) Single SPDT relay Catalog Sheet: 270062
MR-104/T (with mounting hardware) MR-104/C (in metal enclosure) 4-position SPDT relay Catalog Sheet: 270062
MR-201/T (with mounting hardware) MR-201/C (in metal enclosure) Single DPDT relay Catalog Sheet: 270062
MR-204/T (with mounting hardware) MR-204/C (in metal enclosure) 4-position DPDT relay Catalog Sheet: 270062
Heavy Duty DPDT Power Relays
MR-199 heavy duty power relays are designed for control applications where 30-Amp DPDT
contacts are required. Two models are available: a 115Vac coil and a 24Vdc coil, each of
which may be mounted in a rugged steel enclosure.
MR-199X-13 (relay only) MR-199X-13/C (in metal enclosure) Power Relay — 24 VDC Catalog Sheet: 270065
MR-199AX-14 (relay only) MR-199AX-14/C (in metal enclosure) Power Relay — 120 VDC Catalog Sheet: 270065
24 Vac 60 Hz
24 Vdc
120 Vac 60 Hz