Specifications

Hazardous Location
Devices
Door Holders
& Relays
47
SUBMIT


EST3
Hazardous Location Devices
Hazardous Location, weatherproof Strobes
• Class I, II, or III locations
106DEX hazardous location strobes are diode polarized life safety signaling appliances designed for installa-
tion in hazardous environments. Rigid specifications and state-of-the-art technology provide for high visual
output and low maintenance. Strobes are UL 1971 listed as visual signaling appliances for the hearing
impaired in non-sleeping areas and may be used to meet ADA requirements.
106DEXPSTC-FJ Hazardous Location/ Weatherproof Strobe – Pendant Mount Catalog Sheet: 85001-0547
106DEXBSTC-FJ Hazardous Location/ Weatherproof Strobe – Bracket Mount Catalog Sheet: 85001-0547
Hazardous Location Multiple Tone Signals
• Class I hazardous locations, for Divisions 1 and 2, Groups B, C and D
5533BD signals are heavy-duty industrial, tone-selectable, signaling devices capable of producing volume-controlled,
high-decibel tones. The signals accept up to two contact closures and deliver two audible output signals selected from
the 19 available tones. The two tones may be selected by setting miniature switches within the units. One of the tones
can be assigned a priority status to override the other tone.
5533BD-AW Diode Polarized Hazardous Location Signal Catalog Sheet: 85001-0387
Hazardous Location Horns and Sirens
• Class I hazardous locations, for Divisions 1 and 2, Groups B, C and D
GE Security hazardous location horns and sirens are extremely high decibel, high-performance diode-polarized signaling
appliances intended for fire alarm and life safety applications. Signals are solid-state with no moving parts or contacts
to wear out. They require no maintenance or lubrication. The signals operate with very low current consumption and
do not require extra current on start-up.
5522D-AW (Horn) 5523D-AW (Siren) Horn or siren – 24 Vdc Catalog Sheet: 85001-0385
Hazardous Location Bells
• Class I groups B, C and D locations • Class III hazardous locations, for Divisions 1 and 2
• Class II groups E, F and G locations
430D series of hazardous location bells are diode-polarized, heavy duty fire bells for use in life safety applications
where a diode supervised signal is required. They can be mounted to any solid surface using two 3/8 inch (10 mm)
bolts and the supplied mounting brackets or to a rigid conduit. The integral explosion-proof housing is mechani-
cally terminated to accept a standard 3/4 inch -14 National Pipe Taper (NPT) nipple.
439DEX-6AW (6") 439DEX-8AW (8") 439DEX-10AW (10") Bell – 24 Vdc Catalog Sheet: 85001-0399
438DEX-6N5 (6") 438DEX-8N5 (8") 438DEX-10N5 (10") Bell – 120 Vac Catalog Sheet: 85001-0399
Hazardous Location Horns
• Class I groups B, C and D locations • Class III hazardous locations, for Divisions 1 and 2
• Class II groups E, F and G locations
888D and 889D hazardous location horns are diode-polarized, heavy duty, high decibel vibrating horns intended for use
in life safety systems in hazardous (classified) locations. These horns may be mounted to any solid surface using two
bolts. Each unit is supplied with a sealing fitting for a 3/4 inch -14 National Pipe Taper (NPT) nipple, and wire leads for
the electrical connection to the life safety system notification appliance circuit.
888D-N5 (120 Vac) 889D-AW (24 Vdc) Horn – 120 Vac Catalog Sheet: 85001-0397
Notification Appliances