Specifications

36
EST3
Network
SUBMIT



EST3
EST3
EST3
EST3
Intelligent Initiating Devices
Initiating
Devices
Signature Detector Guard
Constructed of sturdy 16-guage steel, the SIGA-DG Smoke Detector Guard is designed
to protect SIGA-IPHS 4D and SIGA-PS smoke detectors from damage or tampering. The
advanced computer-designed louver system allows smoke detectors to be installed at
their listed spacing and has no effect on operating sensitivity.
SIGA-DG Smoke Detector Guard Catalog Sheet: 85001-0359
SIGA-DGSA Detector Guard Surface Mount Accessory Catalog Sheet: 85001-0359
Detector Mounting Plate
The SIGA-DMP Detector Mounting Plate is a 7-inch (178mm) square mounting plate de-
signed to provide convenient mounting of Signature Series intelligent smoke detectors in
raised floor or plenum applications. The detector mounting plate may also be installed in
low velocity ducts that have a maximum width of up to 36-inches (915mm) and a maximum
height of up to 36-inches (915mm).
SIGA-DMP Detector Mounting Plate Catalog Sheet: 85001-0255
Remote LED
The remote LED connects to the SIGA-SB or SIGA-SB4 Standard Base. It features a North
American size one-gang plastic faceplate with a white finish and red alarm LED.
SIGA-LED Remote Alarm LED Catalog Sheet: 85001-0245
Trim Skirt
Use the SIGA-TS Trim Skirt to give Signature detectors a finished look and hide surface
imperfections around the detector’s base. Supplied with all four-inch detector bases, the
SIGA-TS4 can also be ordered separately. Use the black model with SIGA-IPHSB.
SIGA-TS Detector Trim Skirt (white) Catalog Sheet: 85001-0245
SIGA-TSB Detector Trim Skirt (black) Catalog Sheet: 85001-0245
SIGA-TS4 Detector Trim Skirt (white) – for 4-inch box Catalog Sheet: 85001-0245
Detectors, p. 26; Detector Bases, p. 27
Signature Series
Accessories