Specifications

EST3

Network

SUBMIT



Network

Ethernet

Networking

Optional interface for monitoring applications.

See pages 8-11 for UL-listed equipment suitable for common control applications.

10/100 MB Ethernet® Switching Hub

The NETSW-EIS6-xM series switches are industrial grade six-port, 10/100 Mbps auto-negoti-

ating switching hubs. Each switch provides four 10/100 Mbps shielded RJ-45 connectors for

twisted pair (Ethernet) connections and two 100 Mbps fiber ports. The NETSW-EIS6-MM sup-

ports multi mode fiber and uses ST connectors while the NETSW-EIS6-SM supports single

mode fiber and uses SC connectors. Both switches operate on a nominal 24 VDC that can be

supplied from a fire alarm control panel or booster power supply ensuring power is always

available. Connections are provided for redundant power supplies.

NETSW-EIS6-MM 10BASE-T/100BASE-TX/100BASE-FX 4 RJ-45 port, ST connectors Catalog Sheet: 85006-0057

NETSW-EIS6-SM 10BASE-T/100BASE-TX/100BASE-FX 4 port, SC connectors Catalog Sheet: 85006-0057

Ethernet

Fiber Optic Network Interface

The NETCOM-1F allows GE Security fire alarm panels to communicate with a PC running

FireWorks or ACDB software or a serial printer over any multimode fiber optic Ethernet

network. The NETCOM-1F is ruggedly constructed industrial grade unit that connects to the

fire alarm control panel’s RS-232 serial port. LEDs on the front of the unit make it easy to

determine its status. Flash ROM memory permits upgraded versions of operating firmware to

be easily downloaded via the serial port. Power is supplied directly from the Fire Alarm

Control Panel, ensuring a reliable and monitored source. For remote printer applications, an

external 120VAC wall mount transformer is supplied.

NETCOM-1F Ethernet Device Server Network Interface – 10Base-T, 10Base-FL Catalog Sheet: 85006-0058

Ethernet

Serial Network Interface

The NETCOM-1S allows GE Security fire alarm panels to communicate with a PC running

FireWorks or ACDB software or a serial printer over Ethernet networks. The NETCOM-1S is

ruggedly constructed industrial grade unit that connects to the fire alarm control panel’s RS-

232 serial port. LEDs on the front of the unit make it easy to determine its status. Flash ROM

memory permits upgraded versions of operating firmware to be easily downloaded via the

serial port. Power is supplied directly from the Fire Alarm Control Panel, ensuring a reliable

and monitored source. For remote printer applications, an external 120VAC wall mount

transformer is supplied.

NETCOM-1S Ethernet Device Server Network Interface – 10/100BASE-T Catalog Sheet: 85006-0059

Note: Refer to the Network Application Manual (p/n 3100576) for detailed information on network application.