User guide

4Sight 77
Administrator Guide
Version 3.1
Basic setup
To set up the Stream Switcher using the WebAdmin, follow these steps:
1. Using a web browser, connect to the WebAdmin (see “WebAdmin” on
page 71 for more details).
2. Click on the Switcher Settings menu item. You will see a list of your
configured switchers.
3. Click on New Switcher to create a new switcher. The following page is
displayed:
4. Fill in the different fields you need to set up your Stream Switcher and
then click on the Save Changes button.
5. Your relay will then be listed in the relay list, followed by its status
that can be either Enabled or Disabled.
NOTE You can click the or buttons to respectively enable or disable
the relay.