User guide

66 Chapter 6
Playlist Broadcaster
Version 3.1
destination_base_port The base port number for the broadcast
must be an even number. If you do not
specify a port number, the default port
(5004) is used.
recent_movies_list_size The minimum number of files that must play
before a file may be repeated.
You can specify this only if the play mode is
weighted_random. By default this value is
zero, so that all the media files play randomly
based only on the weight you have assigned
to each one.
Note:
Be sure to set this value to a number
less than the number of media files in the
playlist. If you set it to a number equal to
or greater than the number of media files,
the broadcast will play each media file
once then stop.
sdp_file Path and name of the SDP file. The path can
be absolute or relative path. This parameter
is mandatory.
destination_sdp_file Needs to be set to the same value as sdp_file.
announce_type Specify the announce type for this playlist.
Value can be "SAP", "SDP_Broadcast", "RTSP"
or "None". If not specified, value will be
"None"
session_name Name of the SAP session if announce_type is
SAP.
broadcast_SDP_is_dynamic Can be either "enabled" or "disabled".
broadcaster_name User name if one needs to be provided to the
destination address.
Table 1. List of parameters
Keyword Value