User guide

48 Chapter 5
Streaming Server
Version 3.1
Relay a UDP stream using a specific network interface card
You can define the network interface card that you want to use for sending
packets by specifying the Local Output Interface parameter in the
Destination section.
For example, imagine that you have two network interface cards, the first
one with the IP address 192.178.106.22 and the second one with the IP
address 193.178.105.126 and you want to use the second one for sending
packets. Enter the following lines:
NOTES If you do not specify the Local Output Interface parameter, the default
network interface card will be used. If you do not know which card is the
default one, ask your system administrator.
If the source is using either SDP announce or SAP announce and a session
name has been given for the destination, then the SAP message will be
forwarded with the new session name.