User guide

4Sight 45
Administrator Guide
Version 3.1
4. Provide the information about the destination (you can add more
destinations if needed). Then click the Save Changes button.
4Sight will then start relaying the source address to the configured
destination addresses:
• If a local interface is specified then the output stream will be directed
to this interface.
• If a SAP session name is specified, then the output will also broadcast
an SAP announce message with the given name. If no SAP session is
broadcasted from the source or if no session name is given in the
output, there will not be any SAP output for the destination.
NOTE The multicast time to live (TTL, see “Glossary” on page 131) is
mandatory if you relay towards a multicast address, and it must be greater
than 0. It can be omitted if relaying to a unicast address.