User guide

44 Chapter 5
Streaming Server
Version 3.1
4. Your relay will then be listed in the relay list, followed by its status that
can be either Enabled or Disabled.
NOTE You can click the or buttons to respectively enable or disable the
relay.
Common configurations
Relay a UDP stream to one or more destinations
To relay a UDP stream, you need to follow these steps:
1. Specify the sender address (this address can be either multicast or
unicast to the server).
2. Select the Relay a UDP Source radio button.
3. Specify the ports you want to listen to (ports number must be
separated by semicolons or spaces).