User's Guide

ManualsBrandsEnvisionWare ManualsElectronicsDeskPad RFID Reader

DeskTop RFID Reader

Model

RFID-READER-KIT PL DeskPad XR BL-U

User Guide

Revision 1.0

Summary of content (7 pages)

PAGE 1
DeskTop RFID Reader Model RFID-READER-KIT PL DeskPad XR BL-U User Guide Revision 1.
PAGE 2
Contents 1. Product Description ............................................................................................................ 3 2. Features ...............................................................................................................................3 3. Specifications ...................................................................................................................... 3 4. Absolute Maximum Ratings .............................................................
PAGE 3
1. Product Description RFID-READER-KIT PL DeskPad XR BL-U is a high performance ISO15693 protocol HF RFID reader. It is designed upon fully self-intellectual property. Based on proprietary efficient anti-collision algorithm, it supports fast tag read/write operation with high identification rate.
PAGE 4
Storage Temperature Supported Transponders Protection class Relative air humidity -20°to +70°C ISO 15693 (ISO 18000-3 MODE 1) IP30 5…95 % (non-condensing) 4. Absolute Maximum Ratings 5.
PAGE 5
6. Connections USB: Type-B Ethernet: RJ-45 DC 12V input: 5.5mm x 2.1mm 7. Installing the USB Drivers At first connection to the PC USB port, Windows® will detect the RFID-READER-KIT PL DeskPad XR BL-U and will ask to install a driver. The USB drivers are located into the USB Drivers folder on the product CD-ROM or download the drivers in following address: http://www.ftdichip.com/Drivers/VCP.htm Two drivers will be installed: - The USB device driver. - The virtual COM port (VCP) driver.
PAGE 6
Click Finish to complete the installation. Repeat the procedure above when Windows® asks for drivers again (virtual com port). 8.
PAGE 7
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.