User manual

ADVANCED FEATURES – Settings Tab – Continued

• Image Mirror – Changes into mirror image.

• Image Flip – Turns the image upside down.

• Low Light – Optimizes the image in low-light situations

• In/Out Door – Optimizes the image for indoor or outdoor lighting.

• USB Bandwidth – Decreasing the value will leave more bandwidth for

other USB devices, but will slow down frame rate. Leaving the Auto box

checked is recommended.

• Exposure – Adjusts the exposure time of the image sensor. Increasing

exposure will slow down frame rate. Leaving the Auto box checked is

recommended.

• White Balance – Increase/decrease the amount of Red color and

increase/decrease the amount of Blue color in the image for manual white

balance adjustment. Leaving the Auto box checked is recommended.

• Flicker – Helps to reduce image flicker when V-Cam is used under

fluorescent lighting. Select the value that most closely matches your local

electrical AC frequency. For North America, choose 60Hz.

• Backlight Comp. – Check this box to enable backlight compensation in

situations where there is strong light in the background, such as when

there is a sun-lit window behind you.

• B/W Mode – Check this box to set the image in black and white mode.

• Auto LED Mode – Changing these settings will have no effect since this

particular webcam model does not have LED functions.

• Default – Click on this button to restore all values in the Settings tab to

default factory settings.

• Save – Saves the current settings to the camera. Previously saved settings

will be overwritten.

• Load – Loads the most recently saved settings.

English