Installation manual

36
5 SERIES 500RO11 INSTALLATION MANUAL
Preventive Maintenance
Water Coil Maintenance
1. Keep all air out of the water. An open loop system
should be checked to ensure that the well head is not
allowing air to infiltrate the water line. Lines should
always be airtight.
2. Keep the system under pressure at all times. It is
recommended in open loop systems that the water
control valve be placed in the discharge line to prevent
loss of pressure during off cycles. Closed loop systems
must have positive static pressure.
NOTE: On open loop systems, if the installation is in
an area with a known high mineral content (125 PPM
or greater) in the water, it is best to establish with the
owner a periodic maintenance schedule so the coil can
be checked regularly. Should periodic coil cleaning be
necessary, use standard coil cleaning procedures which
are compatible with either the cupronickel or copper
water lines. Generally, the more water flowing through the
unit the less chance for scaling.
Obtaining Parts
When ordering service or replacement parts, refer to the
model number and serial number of the unit as stamped
on the serial plate attached to the unit. If replacement
parts are required, mention the date of installation of the
unit and the date of failure, along with an explanation of
the malfunctions and a description of the replacement
parts required.
Replacement Procedures
In-Warranty Material Return
Material may not be returned except by permission
of authorized warranty personnel. Contact your local
distributor for warranty return authorization and assistance.